Top 10 3M 16584

3M Marine Grade Silicone Sealant is formulated specifically for above-the-waterline sealing on RVs, boats and other watercraft. Ideal for hatches, dashboard components, deck hardware, portlights and many other uses inside or out, it features a non-shrinking formula that forms a strong elastomeric bond and stays firm, tough yet flexible even in tough environments. Apply this silicone sealant to paint, fiberglass, bare metal, glass and non-oily wood as well as many plastics and abraded rubber. It resists all types of weather including high temperatures, and fights the growth of mildew which can cause degrading and discoloration. It also won’t turn yellow over time, preserving the sharp, professional look of your boat or other watercraft. It won’t sag, making it easy to apply even on vertical surfaces. It requires no mixing and applies right from the container. This boat sealant becomes tack-free in as little as 20 minutes, and fully cures in 24 to 48 hours so you can get right back out on the water.

Our 3M Perfect-It EX Machine Polish is the highest-performing machine polish we’ve ever introduced for removing compound swirl marks in collision repair. It stays wet longer, letting you use less polish for the same refined finish. Yet it also holds better on the pad for reduced sling and easier cleanup. You get smooth, polished surfaces without compound swirl marks – faster, and at less cost.

Use for for rough featheredging. Could be used for final sanding of plastic filler and putty. Suggested backup pads PN 05756 or PN 05776.

Product Description

3M Marine Adhesive Sealant Fast Cure 5200 is a fast-curing version of long-trusted 3M Marine Adhesive Sealant 5200. It is a tough, flexible polyurethane for permanent bonding and sealing, ideal for use on wood, gelcoat, fiberglass, metal and more. It is recommended for interiors, below the waterline and any other places that are shielded from sunlight. Instead of 5-7 days, it typically cures in just 48 hours. Everything else is the same as the industry standard 5200 adhesive sealant that has been used and trusted for more than 50 years by marine professionals in some of the most demanding conditions on earth. It applies right from the container – no mixing is required – and cures to form a firm, flexible, waterproof seal on joints and boat hardware. Far more than a marine caulk, tough, flexible 3M Marine Adhesive Sealant 5200FC dissipates stress caused by vibration and shock and won’t crack under dynamic force. It resists saltwater, wind, weather and temperature extremes for long periods of worry-free enjoyment on the water.

From the Manufacturer

3M Marine Adhesive Sealant 5200 White. The adhesive sealant is extremely strong, retains its strength above or below water line. Stays flexible too – allows for structural movement. Has excellent resistance to weathering and salt water.

Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Center board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Remains workable with trowel or spatula up to four hours after application. Won’t sag or flow in vertical or horizontal seams.

About 3M Industrial Adhesives and Tapes

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M Industrial Adhesives and Tapes include application-specific products that provide durability, strength, and special characteristics such as temperature resistance and short- and long-term protection. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Use for shaping plastic filler, removing paint around damaged area and scratch refinement of bare metal. Suggested backup pad 05579.

A reattacheable abrasive disc used for blend panel and paint preparation.

3M Accuspray Atomizing Heads are designed specifically for use with 3M Accuspray ONE Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused.

Product Description

Use for fine featheredging or last final sanding step before priming.

From the Manufacturer

3M Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting abrasives that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M Gold Abrasives produce uniform, consistent finishes. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.

3M Gold Paper Sheets are made of long-lasting aluminum oxide abrasive grains on a light A-weight paper backing suitable for lightweight hand sanding and finishing. The open coat and load-resistant coating help prevent loading for longer use, and help produce a smooth, consistent finish. Hand finishing is frequently used in a variety of applications to produce a fine finish.

Loading occurs when material clogs the surface of the sanding paper and the abrasive points, which can quickly make the sheet ineffective. Open coat construction means the abrasive grains are spaced so that dust and debris can collect in the spaces rather than loading the sheet. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, for faster results.