Top 9 Plylox Hurricane Window

Don’t be fooled by imitations, PLYLOX Hurricane Window Clips are the only independent lab tested and hurricane proven tension clip on the market. They have always, and will always be proudly made in the USA with American made steel. Experts say that the most vulnerable part of your home during a windstorm is your windows, and the best way to protect your family and your home is to cover your windows. PLYLOX clips make it quick and easy to board up your home so that you can focus on other important issues. To use, simply measure your window casing and be sure that your windows are inset at least 2-1/2″ to 3″ deep. Once this is established, measure the height x width of the inside of your window casing. Subtract 1/4″ from that measurement and cut your plywood to these exact dimensions. Take your clips out of the bag and slide them onto the vertical sides of your plywood. You will need to first place them about 6″ from the top and bottom of your plywood shutter, and space them according to the chart in the last picture. If they do not fit tightly on your plywood, simply place the tension leg down on a flat surface and with the heel of your hand, push down on the area of the clip that goes on the plywood until they fit snug. Next, place your plywood shutter system into your window frame, then give it a firm push into the casing. Once you are done, move onto the next window and repeat the process. Once the storm has passed, simply use your fingers behind one side of the clips and remove the tension. Your shutter should pop out of the casing. Store your PLYLOX in a safe, dry space for future use.

PATENT-PENDING UNIVERSAL 1/2″ TO 3/4″ ONE SIZE FITS ALL HURR-PRO WINDOW HURRICANE PROTECTION CLIPS – FOR PEACE OF MIND DURING STORMS OR HURRICANES

• Patent Pending Box Clip Style Universal 1/2″ to 3/4″ Hurricane Clips. 24-PACK. Prepare for Hurricane Season well in advance with our Universal HURR-PRO window protection clips. One size fits all plywood thicknesses (1/2″, 5/8″ and 3/4″, and any thickness variation of these due to swelling or thinning of the plywood or board). 

• These ingeniously designed patent pending Stainless Steel hurricane clips use the box spring clip principle for easy adjustment to various plywood thicknesses up to 3/4″. Securely mount plywood boards to the exterior BRICK window casings of your home, without the use of any tools. Typically using 4 clips per window, you can protect 6 windows with this 24-pack. 

• Rugged and Rust-Proof Stainless Steel, inexpensive, easy to use, non-destructive to your home and also reusable year after year! You do not need any special tools, caulking, adhesives or glue to attach.

• Insurance Companies requires Stainles Steel clips for all outdoors Storm protection systems; we are one of the few manufacturers in compliance with these regulations. 

• Get your HURR-PRO HURRICANE CLIPS today and have the secure feeling of preparedness during Hurricane Season.

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

Security Window Film Security Window Film designed to slow or prevent entry from a burglar. If the glass is broken the film will hold the window together preventing or delaying a thief from easily entering your home. A thief's number asset is time and the film takes that asset away. The 12mil security window film is great for store fronts or areas of high concern. If someone attempts to gain entry into the building this film slows them or stops them in their tracks. Excellent UV rejection 90% VLT, virtually clear, blocks 99% of UV rays. To Purchase a Complete Installation Kit (includes: Mounting Solution, Squeegee Card and more) click the following link: RMATPROKIT 2 Ply 12 Mil Window Film Width: 30 in Length: 25 ft Packaging: Orders placed for multiple quantities of the same film will ship as one continuous roll up to 50 ft. Installation Instructions Additional Information: All security films are installed on the interior surface of a window. The best method of installation is to remove the glass from the window frame, install the film, and reinstall the glass into the frame. The frame will act as an anchor to the film. If this is not possible, a bead of clear (or white, if preferred) silicone around the edge of the glass, about 24-48 hours after installation, is highly recommended. This will keep the glass and film firmly anchored in the frame if the glass is broken. Note: Do not apply Window Film on plastic or plexiglass surfaces, motor vehicle windows, frosted, etched, leaded, cracked, holed, deeply scratched glass or glass that is very old (over forty years)

These Hurricane Board-Up Clips are constructed of stamped steel and come unfinished. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

Hurricane tested protection for your home. The fastest and easiest system to board up your windows. No need to drill holes, nail boards, or ruin siding. Measure and cut wood to fit inside casing, slide on “Plylox” clips, push plywood into window casing,you’re protected. To remove just remove tension from clip by hand. Reusable.