We spent many hours on research to finding 5 hp bldc outrunner, reading product features, product specifications for this guide. For those of you who wish to the best 5 hp bldc outrunner, you should not miss this article. 5 hp bldc outrunner coming in a variety of types but also different price range. The following is the top 10 5 hp bldc outrunner by our suggestions
662 reviews analysed
1. 60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs
Feature
- Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
- 5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos
- LiPo 2 – 4s (Cells), NiCd/NiMH: 5 – 12 Cells, 6.4v – 16.8v
- Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
- Programmable – Programming card or using Transmitter
Description
The RC Electric Parts 60A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn’t run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on!
The ESC can be programmed via the transmitter, as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it’ll properly program the ESC.
Benefits:
Programmable Super smooth and accurate linear throttle adjustment
Supports high RPM motors
Utilizes smaller MOSFETs to minimize weight
Minimal heat loss
Specs:
Continuous Output: 60A
Burst Output 80A for 15 seconds
UBEC: 5.5V/4A
Lipo Battery: 2 – 4s (cells)
NiCd/NiMH: 5 – 12 cells
Voltage Input: 6.4v – 16.8v
Size: 68mm x 36mm x 20mm
Weight: 68g
Motor Type: Brushless Motor Brushless Motor
Max RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motor
ESC Manual:
https://www.rcelectricparts.com/esc-user-guide.html
Programming Card Link
https://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp
2. 40A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs
Feature
- Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs
- 5v/3A UBEC (Very Efficient) – ESC can power receiver and servos
- LiPo 2 – 4s (Cells), NiCd/NiMH: 5 – 12 Cells, 6.4v – 16.8v
- Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection
- Programmable – Programming card or using Transmitter
Description
The RC Electric Parts 40A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn’t run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on!
The ESC can be programmed via the transmitter, as explained in the instructions, or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it’ll properly program the ESC.
Benefits:
Programmable Super smooth and accurate linear throttle adjustment
Supports high RPM motors
Utilizes smaller MOSFETs to minimize weight
Minimal heat loss
Specs:
Continuous Output: 40A
Bursts Output: 60A for 15 seconds
UBEC: 5V/3A
Lipo Battery: 2 – 4s (cells)
NiCd/NiMH: 5 – 12 cells
Voltage Input: 6.4v – 16.8v
Size: 71mm x 35mm x 10.5mm
Weight: 48g
Motor Type: Brushless Motor
Max RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motor
ESC Manual:
https://www.rcelectricparts.com/esc-user-guide.html
Programming Card Link
https://www.amazon.com/dp/B07GCVLJ12
Recommended Complementary Parts
3530 1700Kv Brushless Motor Kit https://www.amazon.com/dp/B07SGFLTF3
3530 1400Kv Brushless Motor Kit https://www.amazon.com/dp/B083LHKWG4
3530 1450Kv Brushless Motor Kit https://www.amazon.com/dp/B083LHXLXW
3. DYS D2836 1500KV Brushless Motor 2-4S Outrunner Motor for RC Models FPV Multirotor Quadcopter
Description
Item name: D2836
KV: 1500
Pull: 1150g
Motor size(mm): Ф28*36
Battery: 2-4s Lipo
Package Contents:
1 x D2836 Brushless Motor
If for any reason you are unhappy with any product, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
4. DYS D2836 1120KV Brushless Motor 2-4S Outrunner Motor for RC Models FPV Multirotor Quadcopter
Description
Item name: D2836
KV: 1120
Pull: 1130g
Motor size(mm): Ф28*36
Battery: 2-4s Lipo
Package Contents:
1 x D2836 Brushless Motor
UAV-parts is the distributor of DYS. If for any reason you are unhappy with any product, please do not hesitate to contact UAV-parts. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
5. DYS D3548 1100KV Brushless Motor Outrunner for RC Models FPV Multirotor Quadcopter
Description
Brand Name: DYS
Item Name: D3548 Motor
KV: 1100
Motor Dimensions (Dia.*Len): Φ35×48mm
Weight (g): 156g
No. of Cells (Lipo): 3-5S
Pull: 2150g
Recommended ESC: 70A
Package Contents:
1 x DYS D3548 Motor
If for any reason you are unhappy with any product, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
6. Hobbypower A2212 1000kv Brushless Motor + 30a ESC for Multicopter 450 X525 Quadcopter
Description
XXD A2212 brushless motor:
KV: 1000
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Weight: 47g
30A speed controller:
Output: Continuous 30A, Burst 40A up to 10 Secs.
Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NIMh battery.
BEC: 1A / 5V (Linear mode).
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
Size: 45mm (L) * 24mm (W) * 11mm (H).
Weight: 25g.
Package Including:
XXD A2212 1000KV Brushless Outrunner Motor x1
30A Brushless speed controller x1
7. Nine to Nine 4 Pcs A2212 13T 1000KV Outrunner Brushless Motor for DJI F450 F550 MWC Multicopter
Description
Specifications:
KV:1000
Max. efficiency: 80%
Max. efficiency current: 4-10A(>75%)
Current capacity: 12A/60s
No load current(10V): 0.5A
Number of cells: 2-3 Li-Poly
Resistance: 0.090 ohms
Model weight: 300-800g
Shaft Diameter: 3.17mm
Item size: 2.8 * 4cm (Diameter * Length)
Package size: 13.5 * 10.5 * 4.8cm
Package including:
4 * Brushless Motor
4 * Fitting Set
8. Goolsky SURPASS High Performance 2204 1400KV 14 Poles Brushless Motor for RC Airplane Fixed-wing
Feature
- 14 Pole 12 slot hi-torque motor design.
- CNC machined 6061 T6 billet aluminum heatsink can.
- High purity copper windings maximizes efficiency, High RPM ABEC5 oversized bearings.
- Precision balanced rotor, smoothness for best reliability and maximum RPM.
- Stator-super thin (0.2mm) laminations
- Precision engineered for maximum energy conversion.
Description
The original SURPASS 2204 1400KV brushless motor is designed to provide both quality and performance at an affordable price. It is built from high quality aluminum alloy which is produced from the latest CNC milling machines, and is designed with high power and rotation speed to provide longer run time for RC airplane fixed-wing.
Features:
14 Pole 12 slot hi-torque motor design.
CNC machined 6061 T6 billet aluminum heatsink can.
High purity copper windings maximizes efficiency.
High RPM ABEC5 oversized bearings.
Precision balanced rotor, smoothness for best reliability and maximum RPM.
Stator-super thin (0.2mm) laminations.
Precision engineered for maximum energy conversion.
Specifications:
Item No.: C2204-25
KV(RPM/Volt): 1400KV
Watt: 160W
Voltage range: 7-15V
Max amps: 13A
IO: 0.5A
Resistance: 0.307
Motor size: Ø28 * 22mm
Stator size: 2204
Recommended propeller: 7.5 * 3.5 / 8 * 4 / 9 * 5
Connector: 3.5mm golden banana connector
Weight: 28.7g
Package Information:
Package size: 8 * 6.5 * 5cm / 3.2 * 2.6 * 2.0in
Package weight: 59g / 2.1oz
Package List:
1 * SURPASS 2204 1400KV Motor
9. DYS BE1806 2300KV Brushless Motor Race Edition for Multicopters Parts 160~210 Micro Drone (Black 1400KV)
Description
KV: 1400
Configu Ration: NP
Stator Diameter: 18mm
Stator Length: 6mm
Shaft Diameter: 2.0mm
Motor Dimensions(Dia.*Len): Φ23×18.5mm
Weight (g): 18g
No.of Cells(Lipo): 2-4S
Max Continuous Current(A): 5.4A
Max Continuous Power(W): 79.9W
Internal Resistance: Ω
Low vibration motor great for flying
-To make aircraft more stable
-Less operating noise
-More efficient
-Bearings, long life
DYS final released BE series super strength out-runner multicopter dedicated brushless motor, The BE series motor is with Kawasaki, Japan 1200 # 0.2mm high efficiency silicon steel and 40UH high temperature powerful magnet. Selected the Japanese NSK pure imported bearings to reduce motor vibration, shell using high-precision CNC machining and professional balancing test, making concentricity, balance is greatly enhanced. DYS BE Series multicopter dedicated motor perfectly compatible with more than 99% of commercially available brushless ESC.
Package Contents:
1 x BE1806 1400KV Brushless Motor
If for any reason you are unhappy with any product, please do not hesitate to contact UAV-parts. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
10. Flipsky Hgltech BLDC Belt Brushless Motor 6374 190KV 3250W with The Hall Sensor for DIY Electric Skateboard Longboarding (with 15T Pulley)
Feature
- 【Excellent performance】Each motor handled 70a peak with 20-30a average with load no problem.
- 【Wheel customizability】Can be used in DIY Electric Skateboard Electric Bike 、Surfboard ,ect.
- 【Strong power】Great 8Nm torque and speed, Smooth power accelerates.
- 【Powerful system】 The Max Output Watt is 3250W, Max Current: 85 Amps,Max Volts: 12S .Recommend ESC is 3-12S 50A (eFSESC4.12 50A or FSESC 6.6 60A)
- 【Decend design】Good finishing on the whole outer body to Enable Motors Dustproof , with sturdy shaft & Lamination Japan steel startor, used 12awg high strand silicone wire with 4.0mm gold bullet connectors.(New package upgrade, include keyway and 15T gear)
Description
Product Spec
Max Power: 3250 Watts
Max Current: 85 Amps
Max Volts: 12S
Max Torque: 8Nm
Motor Resistance: 0.05Ohm
Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
Weight: 1.9 lb / 0.86 kg
The motor length:74mm
The motor diameter: 63mm
SHAFT: Diameter 8mm, 30mm length, 3x3x20mm keyway slot.
Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
Wire configuration:
Blue = A
Black = B
Yellow = C
Stator: 0.2mm thickness lamination japan steel
Magnet: N42SH high temp curve magnet
BLDC Motor
The number of pole: 14
Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch
Internal PCB with 120 Degree Hall Effect Sensors.
Motor can be used with or without a sensor. Sensorless operation is most common.
ESC Sensor Wires required to use with ESC.
Shipping
6374 190KV EPOWER Motor (Fits 63mm Motor Mount)
Two types of bottom ID design, will ship randomly
What’s Our Product Feature?
Stator: Lamination Japan steel
12awg high strand silicone wire with 4.0mm gold bullet connectors.
Both support sensor and sensorless mode!
Reference Information
The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
Screws to mount the motor are not included with the motor.
The key for keyawy is not included with motors for shipping
Conclusion
By our suggestions above, we hope that you can found 5 Hp Bldc Outrunner for you.Please don’t forget to share your experience by comment in this post. Thank you!