We spent many hours on research to finding 3/8 compression to 1/4 npt, reading product features, product specifications for this guide. For those of you who wish to the best 3/8 compression to 1/4 npt, you should not miss this article. 3/8 compression to 1/4 npt coming in a variety of types but also different price range. The following is the top 10 3/8 compression to 1/4 npt by our suggestions
875 reviews analysed
1. Dixon 68C-0604 Brass Compression Tube Fitting, Connector, 3/8" Tube OD x 1/4" NPT Male
Feature
- Brass compression fitting
- No flaring, soldering or other preparation of tubing necessary to assemble
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved
- Underwriter’s laboratories listed for flammable liquid
- Compression fittings meet functional requirements of SAE J-512 and ASA
Description
Brass compression fitting. No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Underwriter’s laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
2. Anderson Metals Brass Tube Fitting, Coupling, 3/8" Compression x 1/4" Female Pipe
Feature
- Three piece construction – nut, sleeve and body with attached insert
- Use with copper, brass, aluminium, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction – nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 5/16″-24 and 9/16″-24 Thread size.
3. Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 3/8" Tube OD x 1/4" NPT Male Pipe
Feature
- Three piece construction – nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Thread size: 7/16″-24 and 9/16″-24.
4. LASCO 17-6759 1/4-Inch Female Compression by 3/8-Inch Male Compression Brass Adapter
Description
Product Description
LASCO Plumbing Specialties 17-6759 is a 1/4-Inch Female Compression by 3/8-Inch Male Compression Brass Adapter. Female compression adapter. Lead free brass construction. Lead free approved product in all states. Used with plastic and copper tubing. 1/4-Inch female compression by 3/8-Inch male compression.
From the Manufacturer
LASCO Plumbing Specialties 17-6759 is a 1/4-Inch Female Compression by 3/8-Inch Male Compression Brass Adapter. Female compression adapter. Lead free brass construction. Lead free approved product in all states. Used with plastic and copper tubing. 1/4-Inch female compression by 3/8-Inch male compression.
5. Parker A-Lok 4MSC4N-316 316 Stainless Steel Tube Fitting, Adapter, 1/4" Tube OD x 1/4" NPT Male
Feature
- Adapter for connecting pipes or fittings of different types
- Fitting connects to tubing on one end and has an NPT male connector on the other
- Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel
- Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications
- For use with stainless steel pipe and tubing
6. Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 1/4" Male Pipe
Feature
- Half union for connecting and disconnecting two tubes more easily than with a coupling
- 45-degree flare head tube connection on one side and a male NPT connection on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperature range of -65 to +250 degrees F
- Resists mechanical pullout for a more secure connection
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.
Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.
7. Parker A-Lok 4MSC2N-316 316 Stainless Steel Tube Fitting, Adapter, 1/4" Tube OD x 1/8" NPT Male
Feature
- Adapter for connecting pipes or fittings of different types
- Fitting connects to tubing on one end and has an NPT male connector on the other
- Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel
- Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications
- For use with stainless steel pipe and tubing
Description
The Parker A-Lok MSC-316 series compression tube fitting is made of type 316 stainless steel, and connects tubing to threaded pipe conforming to the National Pipe Thread (NPT) standard in a straight run. This coupling is for a fixed connection between tubing and pipe made of stainless steel. A twin ferrule compression fitting connects to tubing on one end for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications, and a male NPT connector on the other end connects to threaded pipe. This fitting is made of chemically hardened type 316 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. It is commonly used in chemical, petroleum, power generation, laboratory, and medical device plants.
Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.
8. Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression x 3/8" Male Pipe
Feature
- Three piece construction – nut, sleeve and body with attached insert
- Use with copper, brass, aluminum, or plastic tubing
- Standard fittings use short nuts
- Easy to disassemble no flaring tool required
- Primary uses water, gasoline, oil and vacuum lines
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Description
Three piece construction – nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 7/16″-24 and 9/16″-24 Thread sizes.
9. NIGO Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer (1 Pack, 3/4" NPT Male x 1/4" NPT Female)
Feature
- Constructed from extruded bar stock
- Contains low-lead (no more than 2.5%)
- Not for potable/drinking water use
- Max. Pressure: 1000 PSI WOG
- Temperatures range from -65 to 250 F
- National Pipe Taper (NPT) threads: U.S. standard for tapered threads used on threaded pipes and fittings
- Has a 3/4” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters
Description
Products Features
* Item Number: H10-3020
* Constructed from extruded bar stock
* All Nigo’s products conform to specifications ASTM (American Society for Testing and Materials) B124 and B16
* NPT threads on all Nigo’s products meet ASME B1.20.1
* Designed for use in air, water, oil, nature, manufactured, mixed, liquefied petroleum or propane and LP Gas-Air
* Use with brass, steel, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints
* Has a 3/4” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters
* Temperatures range from -65 to 250 F
* Max. Pressure: 1000 PSI WOG
About Us
Nigo Industrial Co,. Ltd manufactures a wide variety of valves and pipe fittings. The company meets international organization for standardization ISO 9001:2015 Quality Management System standard.
10. uxcell Stainless Steel Compression Tube Fitting 1/2-inch NPT Male x Ф3/8-inch Tube OD
Feature
- 【1/2″ NPT MALE x Ф3/8″ TUBE OD】Tube OD : Ф3/8
- Male Dia : NPT1/2
- Ferrule Mini Inner Dia : 10mm/0.39inch
- 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage
- 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can eliminate the drawbacks caused by inadvertent welding
- 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation
- 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean
Description
Specification :
Product Name : Compression Tube Fitting
Material : 304 Stainless Steel
Tube OD : Ф3/8
Male Dia : NPT1/2
Ferrules Mini Inner Dia : 10mm/0.39inch
Total Size : 43*25mm
Color : Silver Tone
Package Content :
1pcs x Compression Tube Fitting
Description:
1.
How to Use : This coupling is for a fixed connection between tubing and pipe made of stainless steel. A single ferrule compression fitting connects to tubing on one end for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications, and a male NPT connector on the other end connects to threaded pipe. Single ferrule compression fittings have fewer possible leak paths than twin ferrule fittings.
2.
High Qunatity : This fitting is made of chemically hardened type 304 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel.
3.
Application : It is commonly used in chemical, petroleum, power generation, laboratory, and device plants.
4.
Note : Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Conclusion
By our suggestions above, we hope that you can found 38 Compression To 14 Npt for you.Please don’t forget to share your experience by comment in this post. Thank you!