Top 10 How To Install A Gas Dryer Line

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

Product Description

Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.

From the Manufacturer

Safely and easily install any gas dryer with a user-friendly kit that includes all the parts you need. Includes 48″ stainless steel gas connector, 3 fittings, pipe thread sealant and leak test solution. Detailed installation guide helps make installation safe, easy and efficient.

Stainless Steel Steam Dryer Installation Kit Includes Everything You Need To Install Your Steam Dryer-
6′ Hose (3/4″ FHT x 3/4″ FHT) with 90 Degree Elbow,
Inlet Adapter, “Y” Connector
1 Foot Feed Hose

Actually, both natural gas and propane gas can be used in gas grills, but the burning conditions are different. We have 1/2” male flare to 3/8” female flare fittings to convert to your 3/8″ male connector propane appliances.
Natural gas burns a little cleaner than propane gas, and it’s more convenient than a propane tank that always needs to be carefully filled.

Product Specification：
Max Working Pressure :1/2 PSIG
Flow Capacity :100000 BTU/hr
Inlet Diameter :1/2″ NPT
Outlet Diameter :3/4″-16UNF
Certificate :CSA

This 24′ Natural Gas patio hose assembly has a 3/8″ female pipe thread x 3/8” female flare quick connect/disconnect with dust plug and cap. Most commonly used to connect Natural Gas or LP appliances to an existing low pressure supply.

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.