Top 10 Pro Flex Gas Line Fittings

Duratrac gas connectors are CSA certified to ANSI Z21.24 CSA/CGA 6.10 Standard connectors for gas appliance and ANSI Z21.75 CSA/CGA 6.27 Standard Connectors for outdoor gas appliance and manufactured homes. The corrosion resistant yellow coating protects the product from exposure from harsh weather and certain chemicals. Refer to chart for BTU rating.

Purchase tip: This item is for large Btu demand appliances requiring 1″ OD pipe diameter and 3/4″ end fittings, applicable for appliances such as tankless water heater (over 150,000 Btu), commercial tank water heater, large space heater, large furnace, commericial fryer, commercial dryer, commericial oven, and commercial restaurant equipments. For smaller appliances such as 30, 40, 50, 75, 100 gallon residential gas water heaters, oven, cooktop, small tankless water heater less than 150,000 Btu, residential dryer, residential fire place, residential furnace and space heater use 1/2″ OD pipe diameter with 1/2″ fittings. 

Flextron 24 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.

Specifications:

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

PROCURU Gas Connector is tested and certified by CSA for indoor and outdoor use. Approved for LP or Propane including Natural Gas used in common appliances. 100% leak tested for safe and reliable performance. SafeGuard Coating adds patented layer of protection on Corrugated Stainless Steel Tubing against corrosion and common household cleaning agents.

Flextron 18 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.

Specifications:

The HOME-FLEX Underground 3/4 in. x 100 ft. Pipe is made specifically for small jobs and repairs. Easy to work with and attach directly to our couplings or transition fittings for a simple application. Long enough to serve large jobs or multiple jobs from 1 roll.

Choose Flextron’s Flexible Gas Hose for your indoor and outdoor stationary gas appliances. This corrugated hose was manufactured with the highest quality materials and workmanship to ensure safety, reliability and performance. It is available in multiple lengths, diameters and fitting sizes to meet your particular needs.

Flextron 36 Inch Flexible Gas Line Connector features 1/2 Inch Outer Diameter & 3/8 Inch Inner diameter with 1/2 Inch Female Iron Pipe (FIP) x 1/2 Inch Female Iron Pipe (FIP) Fittings. This gas connector is from YC38 series of connectors and is made of uncoated stainless steel. Designed for indoor and outdoor use with Dryer and Water Heater Connectors. It Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. The coating is applied only after the connector has been 100% leak tested to provide a complete corrosion resistance. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit.

Specifications:

This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 46″ long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.