We spent many hours on research to finding 100 pressure washer hose, reading product features, product specifications for this guide. For those of you who wish to the best 100 pressure washer hose, you should not miss this article. 100 pressure washer hose coming in a variety of types but also different price range. The following is the top 9 100 pressure washer hose by our suggestions
791 reviews analysed
1. SIMPSON Cleaning Monster 41030- 3/8" x 100′ 4500 PSI Cold Water Replacement/Extension Hose
Description
Monster hoses are made with a dual-braided construction of steel over polyester and jacketed with translucent polyurethane for high strength, durability. They are equipped with quick connect fittings for quick and easy setup 3/8” Male quick connect plug x 3/8” Female quick connect socket. Translucent polyurethane outer jacket is non-marring, abrasion resistant, and designed to fit most gas pressure washers with standard quick connections. Up to 140°F maximum temperate water, these are used as an original hose replacement or an extension of an existing hose. 90 Day limited accessory
2. 100 ft 3/8" Gray Non-Marking 4000psi Pressure Washer Hose
3. Tool Daily Pressure Washer Hose, 3/8 Inch x 50 FT, Quick Connect, 4000 PSI, High Tensile Wire Braided
Feature
- Pressure washer hose 50 FT is made from upgraded high tensile Steel-Wire Braid, Scuff and mark resistant construction for prolonged service life. No leaking.
- Max Working Pressure is up to 4000 PSI. Burst Pressure is up to 16000 PSI. Flow rate is from 2.5 GPM to 5 GPM. Max Temperature is up to 176 F.
- Power washer hose extension fits most pressure washer models. The 3/8 pressure washer hose has 3/8″ quick connect female socket and 3/8″ plug. Easy to connect and disconnect.
- Pressure washer hoses is 50 FT X 3/8 Inch. Bend radius of the hose is 4.7 inch.
- Application: 4000 PSI pressure washer hose is used for residential and commercial washing, such as washing car, floors, motorcycle, windows, siding, driveways, and roofs.
4. JGB Enterprises Eagle Hose Eaglewash I Wrapped Blue Modified Nitrile Pressure Washer Hose Assembly, 3/8" NPT Male X NPT Male Swivel with Guards, 4000 psi Maximum Pressure, 100′ Length, 3/8" Hose ID
Feature
- Hose for high-pressure, high-temperature pressure washing equipment
- Nitrile tube for resistance to abrasion, tears, solvents, and petroleum-based oils
- Neoprene cover for resistance to abrasion and oil
- Braided wire reinforcement for maintaining maximum pressure
- Maximum operating temperature of 310 degrees F (154 degrees C)
5. JGB Enterprises Eagle Hose Eagleflex II 5800 Wrapped Blue Nitrile RMA Class B Pressure Washer Hose Assembly, 3/8" NPT Male X NPT Male Swivel with Guards, 5800 psi Maximum Pressure, 100′ Length, 3/8" Hose ID
Description
JGB Eagleflex II is specially designed for use on pressure washer machines with working pressures up to 6000 psi and temperatures up to 310°F. Synthetic rubber tube, resistant against cold and hot water with usual cleaning agents. Two braids of high tensile steel wire reinforcement. Abrasion and ozone resistant synthetic rubber cover. 6000 PSI Working Pressure, 18,013 PSI Burst Pressure.
6. Tool Daily High Pressure Washer Hose 50 FT X 1/4 Inch, 3000 PSI, M22 14mm or M22 15mm, Replacement Power Washer Hose for Most Brands
Feature
- Replacement pressure washer hose for Ryobi, Karcher, Honda, Troy Bilt, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more. Fit most electric or gas pressure washer.
- High pressure hose has M22 female thread. Compatible M22 14mm and M22 15mm fitting. The adpter attached can change female M22 fitting to male M22 fitting.
- Pressure washer extension hose is non-kink, durable, weather and abrasion resistant.
- Pressure washer hoses is 50 FT X 1/4 Inch. The working pressure is up to 3000 PSI. Max. Temperature: 140℉ / 60℃.
- Application: Used for residential and light commercial washing, such as washing Car, Floors, Motorcycle, Windows, Siding, Driveways, Roofs and so on.
7. Tool Daily Sewer Jetter Kit for Pressure Washer, 100 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 4400 PSI
Feature
- Sewer jetting kit include 100 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug.
- Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch.
- Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.
- Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0
- Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5.
8. 4000 PSI Black 3/8" x 50 FT 1 Layers of High Tensile Wire Braided Rubber Wrapped Pressure Washer Hose with Couplers
Feature
- Rubber construction throughout, with a single layer of steel-wire braid.
- Designed for flow ratings of 2.5 to 5 GPM commercial cleaning applications
- Inner Tube: Synthetic rubber Reinforcement: One layer of high tensile braided steel
- Working Pressure: 4000 PSI – 276 Bar Proof Pressure: 8000 PSI – 552 Bar Burst Pressure: 16000 PSI –
- Hose Connection: 3/8″ Quick Connect Female Brass Socket & 3/8″ Steel Plug
Description
Schieffer 4000 PSI Black 3/8″ x 50 FT 1 Layers of High Tensile Wire Braided Rubber Wrapped Pressure Washer Hose with Couplers
An economical choice for a pressure-washer hose. Designed for flow ratings of 2.5 to 5 GPM commercial cleaning applications. Rubber construction throughout, with a single layer of steel-wire braid.
Hose Construction
- Inner Tube: Synthetic rubber
- Reinforcement: One layer of high tensile braided steel
- Cover: Wrapped finish with an embossed lay line
- Temperature Range: 250°F Maximum
- Applications: Suitable for commercial pressure cleaning applications
- **Not for steam service**
Hose Specifications:
- Hose Length: 50′
- Hose Size: DN 10 – Dash -06
- Hose Connection: 3/8″ Quick Connect Female Brass Socket & 3/8″ Steel Plug
- Hose I.D: .40″ (10.1mm)
- Hose O.D: .67″ (16.9mm)
- Working Pressure: 4000 PSI – 276 Bar
- Proof Pressure: 8000 PSI – 552 Bar
- Burst Pressure: 16000 PSI – 1104 Bar
- Bend Radius (MIN): 3.54″ (90mm)
- Impulse Life: 200,000+
Schieffer Quality Guarantee: Schieffer is an ISO 9001:2008 certified in 2012, The company continues to implement and embrace the most modern practices of quality and continuous process improvement. Each batch is quality tested to meet or exceed expectations.
9. M MINGLE Pressure Washer Hose 50 Feet X 1/4 Inch for Most Brands, Compatible M22 14mm and M22 15mm, 3600 PSI
Feature
- High pressure hose is 50 FT X 1/4 Inch, fits most brand power washer, such as Karcher, Troy Bilt, Ryobi, Honda, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more.
- Max working pressure is 3600 PSI. Max temperature is 140℉ / 60℃. Pressure washer hoses have M22 female thread. Compatible M22 14mm and M22 15mm fitting. The brass coupler attached can change female M22 fitting to male M22 fitting.
- Power washer hose uses premium quality material, durable, weather and abrasion resistant. Easy to carry, drag and roll up. Non marking and Never kink permanently. Bend radius of the hose is 4.33 inch.
- Pressure washer extension hose in your home and commercial usage, safe to wash Car, Motorcycle, Floors, Windows, Driveways, Roofs, Pool, Siding and so on.
- AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions.
Conclusion
By our suggestions above, we hope that you can found 100 Pressure Washer Hose for you.Please don’t forget to share your experience by comment in this post. Thank you!