Nowadays, there are so many products of homebrew fermentor and kegerator in the market and you are wondering to choose a best one.You have searched for homebrew fermentor and kegerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings homebrew fermentor and kegerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
522 reviews analysed
1. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. New arrival top quality homebrew CO2 Charger Kit Premium Regulated with Gas Disconnect 0-30 PSI for Draft Beer Kegerator Soda(CO2 Charger)
Feature
- New arrival top quality CO2 Charger Kit.Throw away those vulnerable,leaking Charger.Use our stable,durable TOP Quality CO2 Charger.
- 3/8 Thread fit most of 16g 33g or 74g co2 Cartridge.
- Regulate Range : 0 to 30 PSI, practical for beer dispensing applications.
- Compact Design: Very small regulator,portable and dial in the PSI perfectly
- Easy to Use:Simply screw on the MFL threaded disconnect, attach to your keg, and set the dispense pressure.
Description
The TOP Quality CO2 Charger Kit is made from machined anodised aluminium,not plastic.if not ,just get full refund with no ask Pressure calibration table make you no worry about pressing the trigger on the charger too much or too little Just use the regulator to set the pressure, you can get good taste beer since you can dial in the PSI perfectly Package Included: 1×Preminum Regulated Co2 Charger 1 x GAS Disconnect Please Note: This gas meter cannot measure past 30psi,please adjust the control switch and let the pressure slowly increases.As it is a precision instrument,it will be damaged if you use it in improper way.The pressure calibration table does not affect your use when it doesn’t work,you can just use it with your feel or get a new pressure calibration table.Please confirm that the scale is zero when you get your product.If you have any question about this ,please contact us
3. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
4. Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range
Feature
- Electronic Single Stage Temperature Control, 120/240 VAC, UL TYPE 1, IP20, SPDT, with 12 amp power c
- Featuresa lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD)
- Replaces the popular A419 Johnson Control model with upgraded technology.
- The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable
- In stock – Ships FAST!
Description
The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.
5. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
6. Homebrew Adjustable Pressure Valve w/Gauge With Thread Gas Ball Lock, Kegging equipment for beer brew
Feature
- This Ball Lock Adjustable Pressure valve with gauge allows you to relieve pressure while filtering your beer from one keg to another
- aloowing a closed system. You can also naturally carbonate your beer in a keg without have to worry about over carbonating.
- The farthest end away from the ball lock disconnect is how you adjust the pressure. Simply turn the ap on way of the other until the desired pressure is maintained. Gauge reads 0-15 psi.
- Tthe guage can remove if broken, and we can sell separately for the guage.
- About the adjustable pressure value that means if the keg pressure is 10psi, then you want the keg pressure to 6psi,then you can use the pressure value to adjust to 6psi
- Package includes: 1 x Adjustable Pressure Valve with gauge 1 x thread gas ball lock disconnect
Description
Homebrew Adjustable Pressure Valve w/Gauge With Thread Gas Ball Lock,Kegging equipment
7. 6 Litre Stainless steel 304 Ball Lock Cornelius style Beer Keg, Pepsi kegs, soda wine beer barrel (6L(1.6 Gallon))
Feature
- Thickness:1 mm.Made of 304 Stainless Steel.Mini 1.6 Gallon Ball Lock Keg for Home Brew
- Extra Seal Replacement Kit O-ring for free.
- Small and mighty: Mini keg system that packs the power of a taproom into a portable, compact 2.65 gallon barrel.
- This kegs are easily stackable once disconnects have been attached.Thickness:1 mm
- Artillery for the small batch brewer. Carbonate homebrew in minutes, not weeks. Real-time carbonation control. A quick pressure adjustment and you’re instantly pouring perfect pints.
Description
From tailgating to camping, a picnic or a party, It is the party-powering ammunition you need to have a good time, anytime and anywhere. Thickness:1 mm
8. Heating and Cooling Digital Temperature Controller Thermostat
Feature
- PRECISE TEMPERATURE CONTROL for everything from homebrewing fermentation to seedling heat mats to aquariums and terrariums!
- HEATING AND COOLING options allow for easy connection to heat mats or freezers. Minimum temperature: 0°F Maximum Temperature: 212°F
- STRAIGHTFORWARD DESIGN makes operation a breeze. See your set temperature and your probe temperature with an easy to read screen. Unit includes detailed instructions for operation. Universal outlet ensures ultimate compatibility with any device. 56 inch power cord and probe cord allows for use in any environment or application.
- FLEXIBLE SETTINGS include heating and cooling, delay times, temperature control, and slewing range to prevent rapid cycling. This temperature controller is flexible enough to work for a large variety of applications but simple enough to save you time and money!
- Includes 1x Temperature Controller and 1x Instructions Sheet. Looking for a kit for easy homebrew fermentation temperature control and heating? Check out ours by searching Amazon for B07FW854H3
Description
Unit of Measure: Degrees Fahrenheit
Working voltage range: AC90V-250V ±10% 50/60Hz
Power consumption: ≤3W
Standby Consumption: ≤0.5W
Temperature control range: 0°F~212°F
Measurement error range: ±0.5°F
Relay: 10A/AC220V
Power cord length: 54in. Sensor cord length: 56in.
Includes:
1x Temperature Controller
1x Weekend Brewer Instructions Sheet
9. Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat,1800w,ETL Listed Mushroom Greenhouse Chest Freezer Homebrew Keezer(with Temperature and Humidity Sensor)
Feature
- 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- 2.√Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- 5.√Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Conclusion
By our suggestions above, we hope that you can found Homebrew Fermentor And Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!