Top 10 Pressure Vacuum Breaker 765 Wbv

Febco, 3/4″, 765 Pressure Vacuum Breaker EDP , Used To Protect Against Health Hazard & Non-Health Hazard Backsiphonage Conditions For Lawn Sprinkler Irrigation Systems, Swimming Pools, Laundries & Industrial Plants, All Bronze Body For Durability With 1 Check Valve & An Air Opening In On Assembly, Lightweight Poppet Seals Air Opening Under Minimum Flow Conditions, All Internal Parts Serviceable In Line From Top Of Unit, Designed For Minimal Head Loss, Engineered Plastic Bonnet Protects Valve Body Form Freeze Damage, To Repair Damaged Bonnet & Poppett Use True Value Bobbet Poppett Repair Kit Febco #953422, Pressure Vacuum Breaker Assemblies Should Be Installed At Least 12″ Above The Highest Piping & Outlet Downstream Of The Assembly To Preclude Backpressure, Assemblies Should Be Installed So They Are Easily Accessible For Maintenance & Periodic Tests, Asse 1020, Csa B64.1.2 & UPC Code Approved & Listed.

Do not use this item for any installation or repair of potable water applications. This product does not comply with the “Safe Drinking Water Act,” which requires that products meet low-lead standards in order to be used in systems providing water for human consumption (drinking or cooking). This item is for non-potable (non-human consumption) water applications only (irrigation, fire sprinkler, etc.) Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

Reduced Pressure Principle Backflow Preventer provides high hazard protection for potable water applications. The EZSwap™ Pressure Vessel is removed and replaced with the Flush Fitting Tool for faster flushing and testing.

Reduced Pressure Principle Backflow Preventer provides high hazard protection for potable water applications. The wye pattern, bronze body provides separate access to each check valve and the relief valve for servicing.

Wilkins 1″ 375 Backflow Preventer 1-375 RPZ Reduced Pressure Principle Assembly

This 3/4 inch freeze resistant pressure vacuum breaker prevents the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of bronze body construction, silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, a built-in relief valve to protect the internal components and the body from freezing, tee handle shutoffs, and test cocks for winterization draining. It is ideal in continuous pressure health hazard applications where exposure to sudden freezing conditions such as on irrigation systems and industrial process water systems can occur. The maximum pressure is 150 psi (10. 3 bar) and the minimum pressure is 15 psi (55 kPa).