We spent many hours on research to finding pressure washer soap injector, reading product features, product specifications for this guide. For those of you who wish to the best pressure washer soap injector, you should not miss this article. pressure washer soap injector coming in a variety of types but also different price range. The following is the top 9 pressure washer soap injector by our suggestions
832 reviews analysed
1. Tool Daily Adjustable Soap Chemical Injector for Pressure Washer, 3/8 Inch Quick Connect
Feature
- ATTENTION: Working pressure is 1000 to 2800 PSI. Flow rate is from 2 GPM to 5 GPM. 2800 PSI or higher will not work. Power washer chemical injector kit includes chemical injector, 10 Feet tubing, filter and black soap nozzle.
- Application: Must Follow Manual to Set Up Chemical Injector. It is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals.
- Chemical injector has standard 3/8’’ quick connect fitting. It connects pressure washer pump to hose.
- Dilution ratio of chemical vs water can been adjusted by controlling metering valve.
- Works with most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer.
2. M MINGLE Adjustable Chemical Injector Kit for Pressure Washer, Soap Injector, 3/8 Inch
Feature
- ★Attention: Max pressure is 3200 PSI. Pressure washer downstream chemical injector kit includes chemical injector, 10 feet tubing (siphon hose), filter and black soap nozzle.
- ★Used to siphon detergent out of separate container. The chemical or soap runs after pump, which will not damage pump. Great for cleaning or spraying.
- ★Control metering valve to adjust dilution ratio of chemical and water. Chemical-resist and poly strainer reduces injector clogging.
- ★Soap injector has universal 3/8’’ quick disconnect. It connects between pressure washer pump and hose.
- ★Flow rate is from 2 GPM to 5 GPM. Works with most brands of gas and electric pressure washer, cold and hot water pressure washer.
3. Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
Feature
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer.
- 1/8’’ -27 male BSP thread.
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on.
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings.
4. Valley Industries PK-15000000 Pressure Washer Soap Tubing Kit, Gray
5. Ultimate Washer UW16-PA75B8 High Pressure Chemical Injector, Brass
Feature
- ADAPTOR & HIGH PRESSURE CHEMICAL KIT
- Includes: Adjustable Injector Metering Valve, Tubing and Filter
- Used for Cold or Hot Water Applications; Rated Up to 3500 PSI and 8 GPM
- Brass Adaptor with Standard Garden Hose Fitting by 1/2-inch Male Pipe Thread
- Connects Between Garden Hose and High Pressure Pump
Description
- Help keep your outdoor power equipment running at peak performance by ordering the Ultimate Washer UW16-PA75B8 High Pressure Chemical Injector Kit with Adaptor.
- These quick connect plugs connect to all of the most common pressure washer equipment in the industry.
- Compatible with gas and certain electric pressure washers. Placed on the inlet side of pump.
- Used to provide soap discharge at pressure washer’s maximum pressure.
- Claims for warranty must be made within 90 days of the date of purchase. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.
Visit www.amazon.com/Ultimate-Washer/b/ref=w_bl_hsx_s_lg_web_11316247011?ie=UTF8&node=11316247011 for more information on Ultimate Washer and our extensive line of products.
6. Tool Daily Pressure Washer Siphon Hose and Filter for Soap and Chemical Injector, 10 Feet Tubing, 2 Filters
Feature
- Pressure washer chemical injector tubing kit includes 10 feet replacement tubing, two filters. The tubing can adjust and cut based on your needs.
- ATTENTION: Siphon Hose: Inside Diameter: 7.0 mm
- Outside Diameter: 9.3 mm
- Length: 10 feet.
- Application: Used to siphon detergent out of separate container. It allows for a wider choice of chemicals.
- The filter can avoid contaminants enter the pressure washer hose, pump or gun.
- Works with most brands of gas and electric pressure washer.
7. FUNTECK Pressure Washer Chemical Injector Kit Adjustable Soap Dispenser, 3/8 inch Quick Connect, 10 FT Siphon Hose, Come with a Black Soap Nozzle and Teflon Tape
Feature
- The pressure washer chemical injector kit has a 10 ft of siphon hose with filter that goes into the chemical container, which allows you to use a wide variety of chemicals without harming your pump
- This pressure washer soap injector kit works with any pressure washer 1500-3200 PSI with 3/8.inch quick connection fittings. It fits between a 3/8″ pump outlet and 3/8″ high pressure hose.
- NOTE: if your power washer or hose has M22 or 1/4” connections, please purchase a coupler adapter individually. Pay attention to the direction-of-flow arrow on the injector and do not install it backwards.
- The soap dispenser kit features a screw-in valve which allows you to adjust the dilution ratio and increases your pressure washer’s effectiveness.
- Solid construction – Made of brass and stainless steel , the downstream injector is heavy duty to last a long time.
Description
Features:
Adjustable flow – increase or decrease the amount of chemical as needed
Screw-in valve to positively shut off flow
Allows for a wider choice of chemicals
3/8 inch quick connect
3200 PSI maximum at 2-5 GPM
10 feet of hose with filter goes into the chemical container
Specification:
Inflow: 3/8” Threaded(Male)
Outflow: 3/8” Threaded(Male)
Rated PSI: 1500-3200 PSI
Min GPM: 2
Max GPM: 5
Shipping Weight: 500g
Package Dimension: 15.5 x 15.5 x 5.5cm
Package Content:
1 x Chemical Injector
1 x 10 ft siphon hose with filter
1 x 3/8” female snap coupler
1 x 3/8” male snap coupler
1 x Black soap nozzle
2 x Teflon Tapes
8. Ultimate Washer Adjustable Soap and Chemical Injector Pressure Washer, M22 MxF Connectors
Feature
- Soap and Chemical Injector, 200 Degree, 4000 PSI, 2-5 GPM
- Works with Standard M22 Quick Couplers
- Pressure Washer Chemical Injector Kit Includes Injector, Tubing and Filter
- Adjustable Control Metering Valve
- Used for Cold or Hot Water Applications
- Black Soap Nozzle (not included with kit) is required for proper operation. Great for Cleaning or Spraying, Compatible with Most Brands
Description
Help keep your outdoor power equipment running at peak performance by ordering the Ultimate Washer UW11-PW37AB Soap and Chemical Injector for Pressure Washer.
Soap and chemical injector. M22-Inch quick connect, brass housing, fully adjustable metering valve.
Great for cleaning or spraying. Chemical-resistant poly strainer reduces injector clogging.
Used to siphon detergent out of separate container.
200 Degree, 4000 PSI.
These quick connect plugs connect to all of the most common pressure washer equipment in the industry.
Compatible with most gas and certain electric pressure washers.
A black soap nozzle (not included with kit) is required for proper operation.
9. Valley Industries PK-85400003 Up Stream Chemical Injector-High Pressure, 3500 PSI, 8.0GPM, Brass
Feature
- Designed to be a connection between a garden hose and the inlet side of high pressure pump
- Handle up to 3500 PSI, 8. 0GPM and heat up to 200 degrees
- Featuring an adjustable control metering valve
- Features a brass adaptor with a standard garden hose fitting by ½” MPT
- Compatible with most pressure washer gas brands
Description
Keep running at peak performance with the Valley Industries Universal High Pressure Up Stream Chemical Injector. Designed to be a connection between a garden hose and the inlet side of high pressure pump, while providing soap discharge at pressure washer’s maximum pressure. This chemical injector can handle up to 3500 PSI, 8. 0GPM and heat up to 200 degrees. Featuring an adjustable control metering valve to adjust on the fly. Features a brass adaptor with a standard garden hose fitting by ½” MPT. Compatible with most pressure washer gas brands. Comes standard with injector, hose tubing and filter.
Conclusion
By our suggestions above, we hope that you can found Pressure Washer Soap Injector for you.Please don’t forget to share your experience by comment in this post. Thank you!