Top 10 Sears Whirlpool Washer Dryer

INSTALLATION INSTRUCTIONS: 1) Level the WASHER by rotating front feet with an adjustable wrench to raise/lower. Use a level on top of WASHER until it is completely level, both front-to-back and side-to-side. 2) Clean the top of the WASHER with an all-purpose cleaner, then ensure it is completely dry. 3) Remove the leveling feet from the bottom of the DRYER with an adjustable wrench. 4) Clean the bottom of the DRYER with an all-purpose cleaner, then ensure it is completely dry. 5) Peel protective paper from the adhesive side of one of the foam strips provided. Stick the foam strip along the bottom edge of the DRYER covering small ribs along the bottom edge of the cabinet. Repeat on each edge of the bottom of the DRYER (all four bottom directions). NOTE: Foam strips should not stick out past the edge of DRYER cabinet. 6) With an assistant, lift DRYER on top of WASHER. Line up back of DRYER with back of WASHER. 7) Locate the two horizontal slots in back of DRYER cabinet (directly above stacking bracket screw holes in back of WASHER cabinet). Insert curved end of the metal stacking bracket into horizontal slots on back of DRYER. Attach brackets to the back of the WASHER with provided screws This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) OEM product and Impresa Products has no affiliation with or endorsement from these manufacturers. Our product is not covered under any Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) manufacturer’s warranty. The afforementioned brand names and logos are the registered trademarks of their owners. Any use of the afforementioned brand name, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Catch

SPECIFICATIONS
The 80040 Washer Agitator Dogs replacement kit come in a package of four and are generally found in washers where the motor is connected directly to the washer. The agitator is what causes the thrusting motion in your washer. If you have noticed that your washer is not draining properly, is making unfamiliar noises, shaking, or is simply not washing properly, it could be due to faulty agitator directional cogs. They can be found by simply removing the softener dispenser and then removing the agitator cap. For this repair, you will need a 1/4 or a 3/8ths socket set, and needle nose pliers.

Works with most top name brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Crosley, Maytag.

Replaces part number: 285612, 285770, 3109, 3366877, 387091, 80040, 80040VP, 99989668, AP3119063, ER80040, SB80040.

Fixes the following symptoms:
Will not agitate.
Noisy.
Pumps but will not spin.
Spins slowly.
Shakes and moves.
Not cleaning dishes properly.
Will not drain.
Marks left on clothes.
Does not dispense fabric softener / detergent.

Count on our 80040 Washer Agitator Dogs replacement kit for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

The dryer drum spins on the drum support rollers. When a bearing goes bad on one or more of the drum support rollers, the dryer will spin unevenly or not all. This produces a squeaky or rumbling noise. Go with the 8536974 Drum Support Roller Assembly (Pack of 4) by PartsBroz for a budget-friendly yet reliable solution to this problem.

Replacing damaged drum support rollers can fix the following problems:

• Dryer squeaks
• Dryer makes loud rumbly noises
• Dryer doesn’t spin properly

Installation Tips

Disconnect your dryer from its power source before beginning the repair. Helpful tools include a 1/4-inch nut driver and a small flathead screwdriver. When removing the old drum support rollers, inspect each shaft. If any of the shafts look scratched or worn from the old bad bearings, you’ll want to replace them too.

Compatible brands and models include but are not limited to:

Whirlpool:WGD8500DC4 WGD8500DR4 WGD8500DW4 WGD8540FW1 WGD85HEFC1 YWED90HEFW2 YWED92HEFBD1 YWED92HEFBD2 YWED92HEFC1 YWED92HEFC2 YWED92HEFU1 YWED92HEFU2 YWED92HEFW1 YWED92HEFW2
Kenmore/Sears: 110.77022710 110.77102310 110.77122310 110.78002012 110.78102310 110.78103310 110.81952710 110.91932510 110.91932511
Maytag: YMEDB850YG0 YMEDB850YG1 YMEDB850YG2 YMEDB850YW0 YMEDB850YW1 YMEDB850YW2 YMEDB950YG0
KitchenAid: KEHS01PMT0 KEYE660WHT0 KEYE670BAL2 KEYE677BWH1 KEYE760WWH1 KEYE777BWH0 KEYS677EZ0 KEYS700GT0 KEYS750GT0 KEYS850GZ0 KGYE660WAL1 KGYE670BWH2 KGYS700GQ0 KGYS850GQ0 KGYS977EQ0

Replaces Several Part Numbers: WPW10314173, AP6019303, W10314173, W10314171, 3388342, 3389902, 3396801, 3396802, 3401846, 8536973, 8536974, PS11752609, W10756057, WPW10314173VP

Questions about compatibility? Reach out to us in the customer questions and answers section or on the PartsBroz storefront.

279570 Door Latch Strike Kit is designed for use with your dryer. On your appliance you will find both a strike and a catch. These two parts work together to keep your dryer door closed. Each kit includes two strikes and three catches. Each of the door catches included have a different tension. Make sure you use the one that matches the existing catch on your appliance.