The Best Snap On Distributor Wrench

Stanley J6060A Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 10-50 in-lbs Calibrated to +/- 3% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance.

Stanley J5100 Proto 9 Piece 3/8-inch Drive Torque Adapter Set – 12 Point Designed for easy torque calibrations. Adapters measure 2-inch from the center of the square drive to the center of the adapter opening. Special heat-treated alloy steel helps to increase strength and durability. Box end wall thickness is specially engineered to provide strength while still allowing ample room for access to reach difficult fasteners. 12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners. Proto 3/8″ Drive 9 Piece Torque Adapter Socket Set -12 Point Includes the following items: J5112, J5114, J5116, J5118, J5120, J5122, J5124, J5126, J5128, J2599.

Stanley JSCV-9S Proto 9 Piece Black Chrome Reversible Combination Ratcheting Wrench Set – Spline Black chrome finish is corrosion resistant and visually distinctive. Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline fasteners and Torx fasteners. The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed. 15-Degree angled offset box end helps keep shank clear of obstructions. Anti-Slip Design (ASD) open end.

Snap-On 13 MM 3/8″ Torque Adaptor Wrench for Ford V6 Distributor, Length: 11″, Vintage/Rare, Part # S9050

The OEMTOOLS 1/2″ Drive Torque Wrench is an easy-to-use click-style torque wrench. Simply set the desired torque and ratcheting direction, and tighten until the wrench produces an audible click. Accurate torqueing from 25 to 250 foot-pounds. You should not use the torque wrench as a breaker bar, as this can cause your wrench to become uncalibrated. Properly torquing fasteners is a safety issue. It’s a common misconception that over torquing a fastener makes it less likely to loosen. In fact, it puts additional stress on your fastener and makes it more likely to fatigue. Both over and under torquing and over torquing increase the chance of fastener loosening and fastener damage. The best way to keep your auto fasteners from loosening from vibration is to ensure you tighten each fastener to the manufacturer’s specifications and use Loctite, or something similar, to protect your fasteners from vibrating out. FULL SPECIFICATIONS: – 21-3/4 inches long from head to handle – Calibrated accuracy: +/- 4% – Measures torque in foot-pounds, and Newton-meters – 25-250 Foot-Pounds of Torque (33. 90-337. 60 Newton-meters) – 24-tooth ratchet – Delivered in a blow molded case – Manual included

Stanley J5266 Proto 3/8-inch Drive Hinge Handle 12-inch Made of heat-treated alloy steel. Head flexes 90° from horizontal. Hinge handles Full Polish Finish 12-inch Overall length.

Stanley J712S Proto Black Oxide Adjustable Wrench 12-inch Non-reflective black oxide finish for use where non-plated products are required. Extra wide jaw capacity. Square jaw opening provides strength and tight fit.

THE OEMTOOLS 10 MM COMBINATION WRENCH is composed of Steel and features a Hard Chrome Finish that is easy to clean, won’t show prints, and will resist rust for life. The wrench has a Posi-Grip No-Slip design that provides off corner loading for greater torque with more wrench-to-fastener contact. It has a longer shaft for extra leverage and a smooth, 15 degree offset open end that won’t mark fasteners. Additionally, the box end is offset to give your knuckles greater clearance, so you won’t hit them against your work piece when tightening of loosening fasteners.

We sell a whole range of high quality wrenches that are designed for the toughest jobs in the world. And they’re easy to keep organized, because we’ve adorned them all with deep markings for easy identification. All of this we’ve backed up with a Limited Lifetime Warranty, because we’re confident that we’re producing some of the world’s finest tools.

FULL SPECIFICATIONS:
– Steel body with Hard Chrome Finish
– Posi-Grip No-Slip
– Off corner loading for greater torque
– Deep marking for easy identification
– Open end has a 15 degree offset
– Longer shaft for extra leverage
– Exceed ANSI standards
– Smooth open end won’t mark fasteners