We spent many hours on research to finding sump pump wayne 1/2 hp, reading product features, product specifications for this guide. For those of you who wish to the best sump pump wayne 1/2 hp, you should not miss this article. sump pump wayne 1/2 hp coming in a variety of types but also different price range. The following is the top 9 sump pump wayne 1/2 hp by our suggestions
827 reviews analysed
1. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Cast Iron, Submersible Sump Pump, With Vertical Switch, Designed For 11″ Diameter Or Larger Sump Basin. Pumps Up To 4200 GPH at 0′, Durable Cast Iron Volute, Reliable, Reinforced Poly Carbonate Impeller, Corrosion Resistant Stainless Steel Fasteners, Top Suction Design Filters Debris & Minimizes Clogging, Oil Filled, Thermally Protected Motor Prevents Overheating, Designed For Easy Installation Without Any Plumbing Changes, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Durable Cast Iron Base, Easy Carry Handle For Portability, Float Guard Protects Switch From Hang Ups. This product is assembled in the USA. Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
2. WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Feature
- The product is manufactured in china
- Abrasion Resistant Glass Reinforced Polycarbonate Impeller for Reliability
- The product is highly durable and easy to use. 8 feet water resistant power cord
- Easy installation and easy handling. 120 V, PSC, Oil-Filled 3/4 HP Motor
- For Use In 11 inch. Diameter or Larger Sump Basins
Description
Product Description
3/4 hp, cast iron/stainless steel, submersible sump pump, with vertical switch, designed for 11 inch diameter or larger sump basin, pumps up to 4600 gph at 0′, durable cast iron volute, reliable, reinforced poly carbonate impeller, corrosion resistant stainless steel motor housing & fasteners, top suction design filters debris & minimizes clogging, oil filled, thermally protected motor prevents overheating, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 3/4 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups, 5 year warranty. This product is assembled in the USA. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU980E submersible sump pump can move up to 4600 gallons per hour (gph). The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
3. Wayne WSS30V Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Feature
- New and upgraded WAYNE WSS30V. Completely pre-assembled and drop in ready.
- Primary pump float switch tested to 1 million cycles, up to 10X more than competitors.*
- Assembled in the US with foreign and domestic parts
- Protection when you need it, back up pump continues running when the power is out
- Primary pump moves up to 5100 GPH at 0 feet of head.
- 12V DC back up pump moves up to 2900 GPH at 0 feet of head, one of the highest performing DC pumps on the market
- Ultra-Quiet performance
Description
The all-new Wayne WSS30V features an upgraded back up pump with epoxy coated steel and cast iron construction, no more plastic! the 1/2 hp primary pump moves up to 5100 gph at 0 inch of head and the combination 12-volt back up pump moves 2900 gph at 0 inch of head. Assembled in the USA and built to last, the WSS30V protects your basement with hours of pumping power when the electricity goes out. Battery box dimensions: 9″H X 13″W X 7″L
4. Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Description
Product Description
1/2 hp, submersible, non-clogging, vortex design utility pump, pumps up to 2500 gph at 0′, corrosion resistant reinforced thermoplastic housing, volute & impeller, bottom suction design filters debris & removes water down to 1/4 inch of surface, passes up to 1/2 inch solids, 1 1/4 inch nps high volume discharge with 3/4 inch Garden hose Adapter, easy access handle for portability. This product is assembled in the USA.Easy installation and easy handling.
Amazon.com
The Wayne 1/2 HP 2,500 GPH submersible utility water pump can handle material up to 1/2-inch thick without getting clogged. It can pump out 2500 gallons per hour, with a bottom suction that takes out water to within an eighth of an inch of the surface. Glass reinforced thermoplastic for the housing, volute, and impeller prevents rust, the 3/4-inch adjustable discharge adapter easily connects to garden hoses, and an easy-access handle provides complete portability. Wayne backs its pump with a one-year limited warranty.
5. WAYNE CDU1000 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch – 58321-WYN2
Feature
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Stainless steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1 hp
- max. maximum flow rate is 6100 Gallons Per Hour, 5100 GPH at 10 feet of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
Description
Product Description
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. the top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-inch diameter and larger sump pits.8 feet Water Resisitant Power Cord provides easy access to nearby GFCI(round fault circuit interrupter) protected outlet
From the Manufacturer
The Wayne CDU1000 submersible sump pump can move up to 5400 gallons per hour (gph) at 10 feet of discharge lift. The top suction design filters debris and minimizes clogging. It is a rugged, stainless steel and cast iron submersible sump pump. This pump is designed for 11-Inch diameter and larger sump pits.
6. WAYNE SPF50 1/2 HP Thermoplastic Sump Pump with Integrated Vertical Float Switch
Description
Product Description
1/2 HP, Thermoplastic, Submersible Sump Pump, With Vertical Switch, Pumps Up To 3900 GPH at 0′,Vertical Float Switch For Automatic Operation, Designed For 11″ Diameter Or Larger Sump Basin, Top Suction Design Filters Debris & Minimizes Clogging, Designed For Easy Installation Without Any Plumbing Changes, Float Guard Protects Switch From Hang Ups, Epoxy Coated Steel, High Performance 1/2 HP, Motor, 1-1/2″ NPT Discharge & Reinforced Thermoplastic Base. The product is manufactured in China. Easy installation and easy handling.
From the Manufacturer
The Wayne SPF50 submersible sump pump can move up to 3900 gallons per hour (gph). The top suction design filters debris and minimizes clogging. This pump comes with an epoxy-coated steel, high performance motor. This pump is designed for 11-Inch diameter and larger sump pits.
Intended for Indoor Use Only.
7. WAYNE CDT50 1/2 HP Cast Iron Submersible Sump Pump With Tether Float Switch
Feature
- Assembled in the US with foreign and domestic parts.
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Epoxy-coated steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1/2 hp
- max. Flow rate is 4200 gallons per hour
- 3150 gph at 10 ft. Of discharge lift
- 1-1/2″ npt discharge
- Assembled in the US with foreign and domestic parts.
- Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit
- Epoxy-coated steel motor housing and rugged, cast iron pump base
- Fully submersible
- 1/2 hp
- max. Flow rate is 4200 gallons per hour
- 3150 gph at 10 ft. Of discharge lift
- 1-1/2″ npt discharge
Description
Product Description
CDT50 is a submersible cast iron and coated steel sump pump with tether float switch. For use in 14″ diameter or larger sump basins; 13″ on level and 7″ off level.
From the Manufacturer
1/2 HP Cast Iron Sump Pump with Tether Float Switch. Intended for indoor use only.
8. WAYNE CDU790 1/3 HP Submersible Cast Iron and Steel Sump Pump With Integrated Vertical Float Switch
Feature
- N/A
- Imported
- Assembled in the US with foreign and domestic parts.
- Tested to 1 million cycles*
- Mechanical float switch provides reliable operation and allows installation in sump basins 11″ in diameter or larger
- Top suction strainer filters debris and protects pump from clogging. The pump does not require weep holes and the cast iron seal plate prevents galvanic corrosion and leaks
- High capacity 1-1/2″ npt discharge
- Heavy duty oil filled motor for long life
- Cast iron pump housing for durability
Description
Product Description
1/3 hp, cast iron, submersible sump pump, with vertical switch, pumps up to 3800 gph at 0′, designed for 11 inch diameter or larger sump basin, top suction design filters debris & minimizes clogging, designed for easy installation without any Plumbing changes, epoxy coated steel, high performance 1/3 hp, motor, 1-1/2 inch NPT discharge & durable cast iron base, easy carry handle for portability, float guard protects switch from hang ups. The product is manufactured in china. Easy installation and easy handling.
From the Manufacturer
The Wayne CDU790 features durable cast iron housing for long life and quiet operation. This submersible pump is compactly designed for 11″ or larger sump pits. The CDU series is one of the most popular replacement pumps in America. The ceramic mechanical seal assures long life in the most demanding applications and the 1 1/2″ discharge allows easy installation plus maximum flow. Similar applications to the following brands of submersible sump pumps , Craftsman, Zoeller, Flotec, Water Ace, Myers, Little Giant, Liberty, Pit Viper, Ridgid, Blue Angel, Sta-Rite, Starite, Diamond, Star, Flint and Walling, Coleman, Maytag, Jacuzzi, ShurDri, Shur-dri, GSW, Teel, Master Plumber, UL listed
9. Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch
Description
Product Description
Wayne’s RPP50 1/2 hp sewage pump, pumps up to 6200 gallons per hour with 5 feet of lift. This pump is manufactured with a durable cast iron motor and pump housing and a replaceable piggyback tether switch for automatic or manual operation. The RPP50 is capable of passing 2 inch solids, and is perfect and ideal for below grade installations.
From the Manufacturer
The Wayne RPP50 1/2-Horsepower cast iron sewage pump with tether switch pumps up to 6200-Gallon per hour with 5-Feet of lift. This pump is manufactured with a durable cast iron motor and pump housing with a replaceable piggyback tether switch for automatic operation. The RPP50 is capable of passing 2-Inch solids. This pump is ideal for basement or below grade installations.
Conclusion
By our suggestions above, we hope that you can found Sump Pump Wayne 12 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!