The Best Whirlpool Duet Steam Washer And Dryer

INSTALLATION INSTRUCTIONS: 1) Level the WASHER by rotating front feet with an adjustable wrench to raise/lower. Use a level on top of WASHER until it is completely level, both front-to-back and side-to-side. 2) Clean the top of the WASHER with an all-purpose cleaner, then ensure it is completely dry. 3) Remove the leveling feet from the bottom of the DRYER with an adjustable wrench. 4) Clean the bottom of the DRYER with an all-purpose cleaner, then ensure it is completely dry. 5) Peel protective paper from the adhesive side of one of the foam strips provided. Stick the foam strip along the bottom edge of the DRYER covering small ribs along the bottom edge of the cabinet. Repeat on each edge of the bottom of the DRYER (all four bottom directions). NOTE: Foam strips should not stick out past the edge of DRYER cabinet. 6) With an assistant, lift DRYER on top of WASHER. Line up back of DRYER with back of WASHER. 7) Locate the two horizontal slots in back of DRYER cabinet (directly above stacking bracket screw holes in back of WASHER cabinet). Insert curved end of the metal stacking bracket into horizontal slots on back of DRYER. Attach brackets to the back of the WASHER with provided screws This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) OEM product and Impresa Products has no affiliation with or endorsement from these manufacturers. Our product is not covered under any Whirlpool (R), Kenmore (R), Sears (R), Maytag (R) or KitchenAid (R) manufacturer’s warranty. The afforementioned brand names and logos are the registered trademarks of their owners. Any use of the afforementioned brand name, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Stack kit for standard and long vent dryer

Product Description

This is an O.E.M. Authorized part. Fits with various WHIRLPOOL brand models. Oem part # 8541503.

From the Manufacturer

Maximize laundry space by stacking the Duet dryer on top of the Duet Washer with the Duet Stack Kit. Installation instructions are included, and all that is needed are basic tools to complete the installation.

341241 Dryer Drum Belt for Whirlpool and Kenmore Dryer. Dryer Drum drive belt. This is the most common belt used on Whirlpool, Kenmore, Roper, Kitchen Aid, and the other brand dryers. 92-1/4” long, 1/4” wide, 4 ribs, 3 grooves. Replaces some wider 5 rib belts. This is a new GENUINE Whirlpool Replacement Part. Brand New in Original Retail Packaging –All our parts Are Factory Approved For A Proper Fit.

Possible Repair Solution For: Unusual noises, loud noises, will not tumble, not enough heat, takes too long to dry,not drying properly.

This filter fits models:Whirlpool: LEQ8000HQ1, LEQ8000JQ0, LEQ8557HQ1, LEQ8557HZ1, LEQ8857JQ0, LEQ8857JT0&more.
(The brand name or model designation for this product is made solely for purposes of demonstrating compatibility.)

“Why you need anti-vibration pads?

Everyone would hate having a machine screeching and groaning while it’s doing its thing. However, having a loud machine would be a great bother for most other people as well. In particular, the people who have their machines in their apartments might find it difficult to sleep if their machine is making loud noises – that is, if they’re making use of the cheaper nighttime electricity fees to do their laundry.

Most washing machines produce at least some level of vibration, especially during their spin cycles. However, some of them are bound to make more noise than others – older machines vibrate more than new ones, of course.

Additionally, front-loading ones are louder than top-loading machines, because they spin faster. Inside of front-loading machines, the clothes are plastered to the top, only to fall back down again and again, while the clothes in top-loading ones just get thrown around the sides of the barrel.

Ultimately, I suppose there is tow than one way to fix this.
1.Change to a brand new washing machine or dryer.
2.Buy a set of anti-vibration pad.

Hosom’s anti-vibration pad
Made of high-grade rubber to reduce noise
Bottom grain can increase grip and keep washing machine from moving
Universal size design for more than 90% of washing machines.

If you bought Hosom’s anti-vibration pad
Your machine won’t be able to damage your floor by vibrating against it
The machine won’t be able to “walk” across the room
You won’t have to push it back into place, and hurt yourself (or your floor) while you’re doing it
Anti-vibration products will save your machine and your floor. And they’ll even save your back, since you won’t need to push the machine around. Not to mention you’ll be able to sleep soundly when you run it at night.”

Replaces the following part numbers:
14210003, 31001026, 31531589, 3389628, 3392665, 3394651, 3399844, 345473, 349533, 53-0186, 53-1080, 53-1528, 53-1589, 53-2671, 660996, 660997, 661561, 693306, 694088, 694416, 694868, 695055, 697388, 8066065, 8210, 99906951, 99989673, 99989674, FSP341241, P46-037, W10127457, W10131364

Works for brands:
Whirlpool, Maytag, Magic Chef, KitchenAid, Roper, Norge, Sears, Kenmore, Admiral, Amana and some other

Fit Models:
1LE5700XKW0, 1LE5920XKW0, 1LG5701XKW0, 1LG5921XKW0, 2LG5701XKW0, 3LE5700XKW0, 3LE5710XKW0, 3LE5710XMW0, 3LE5710XMW1, 3LE5710XMW2, 3LG5701XKW0, 3LG5701XPW0, GEN2000HQ1, GEN2000HZ1, GEQ8858HQ1, GEQ8858HZ1, GLE7900XKW0, GLE7900XMW0, GLE7900XMW1, GLE7900XMW2, GLHE7900W0, LE3000XMW0, LE3000XMW1, LE3000XMW2, LE3000XPW0, LE5530XKW0, LE5530XKW1, LE5530XKW2, LE5530XMW0, LE5530XMW1, LE5530XMW2, LE5530XPW0, LE5600XKW0

Contact Us
If you are not sure if part is correct, ask us in Customer questions & answers section or contact us by visiting the Discount Parts Direct storefront.

Business Wholesale
We are a small local company from Houston, Texas offer discount parts for retail and wholesale. If you need to purchase parts for business , please contact us for lower rates.