Top 10 Whirlpool Ultimate Care Ii Dryer Not Heating

Dryer hot fuseis a dryer safety device, when the dryer overheating, it can prevent current flow to the motor circuit.
279838 Heating Element  replacement for numbers 2438, 279837, 279838, 279838A,279838VP,3398064,3403585,8565582,AP3094254, W10724237.
The 3977767 Dryer Thermostat Replacement is a hi-limit thermostat with Terminal Extension Arm. It acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shut down power to the heating element until it drops by 80 degrees Fahrenheit
3392519 dryer thermal fuse is used indryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 inch terminals, and is sold individually. When this fuse is faulty, your dryer will not start or it will not heat properly. This is a one-time fuse, meaning it cannot be re-set.It must be replaced when there is no longer continuity between the terminals.
3392519  replaces part number 3388651, 3392519, 694511, 80005, WP3392519VP
Works with most top name brands:  Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis,
 KitchenAid, Crosley, Amana, Admiral, Magic Chef.
Package list:
1PC 279838 Dryer Heating Element
1PC 397767 Dryer Thermostat kit
1PC 3392519 Dryer Thermal Fuse
Count on our Dryer Heating Element Kit 279838 & 3977767 & 3392519  for an
unrivaled mix of durability, convenient functionality, and great value for
money. Click ‘Add to Cart’ now!
If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Sumnew Tech storefront — click the Sumnew Tech on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

279838 Dryer heating element is rated 240 Volts and 5400 watt. Replaces many newer & Older dryers. Fits some Maytag, Whirlpool, Kenmore, estate and Roper Electric dryers. Replacement part

279838 Dryer Heating Element for Whirlpool kenmore
Replacement #s: 3398064, 3403585, 8565582, AP3094254, W10724237, 3387134, AP3094254, 8565652, AH334313，EA334313, PS334313, EED4400WQ0, EXP279838, 4531017, 4617547, 5324919.
(1) Rated at 5400 Watts 240 Volts
(2) Terminal Connections: 2- 5/16″ male terminals
(3) Designed to fit multiple brands, including Whirlpool, Kenmore, Maytag, KitchenAid, Roper, Crosley, Estate, Amana, Inglis, Admiral, Magic Chef and others.

3392519 Dryer Thermal Fuse(2 PCS)
Replacement #s: 80005, 694511, 3388651,3392519, ET401, G4AP0500, WP3392519VP
This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer or stop the dryer from running.

3977767 Thermostat
Replacement #s: 3399693, 3977767, WP3977767VP
Dryer high limit thermostat, pushes onto the terminal of the heating element. Has one 1/4″ male terminal, 1/4″ female terminal, and one 3/16″ male terminal.

3977393 Thermal Fuse & Thermostat
Replacement #s: 279816VP, 3399848, 279816
Dryer thermal fuse 309 degrees and high limit thermostat 250 degrees kit. Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element.

3387134 Cycling Thermostat
Replacement #s: 306910, 3387134, 3387135, 3387139, ET187, WP3387134VP
Dryer cycling thermostat with internal bias heater. L155-25 (opens at 155F and closes at 130F).

Appliance Model
Kenmore:11096560200,1037777000,1037777020,1037777040,1038017050,ect.
Whirlpool:7EWED1510YM0,7EWED1705YM0,7EWED1730YW0, LEN2000LW0,8543000, ect.
Maytag: 7MMEP0080WW0, MEDB755DW2,MEDB766FW0, ect.

Before replacing heater element :
1.Disconnect the power before installing this part.
2.Tools: nut wrench and pliers.
3.Installation video on YouTube is recommend.

These Gas Dryer Coil Kits are for use in the -M-Style gas valves used in most gas dryers today and for the past 20+ years. Comes with both coils (2).

This coil kit works with FRIGIDAIRE, GE, CROSLEY, ELECTROLUX and other stove, oven, ranges. Gas Valve Solenoid coil kit, Pair of 2 and 3 prongs in the kit. Whirlpool 1653W1A, Whirlpool 1653W0A, Whirlpool 1653^2A Whirlpool 279834 Whirlpool 1053B0A, Whirlpool 1053B1A, Whirlpool 1653^0A, Whirlpool 1653^1A, Whirlpool 1653W1A, Whirlpool 1653W0A, Whirlpool 1653^2A ; and Many more!

Works with most top name brands: Whirlpool, Kenmore, Maytag, Roper, KitchenAid, Amana, Magic Chef, Crosley, Speed Queen, Estate, Admiral, Norge, Inglis, Jenn-Air, Hoover, International.

Fixes the following symptoms:
No heat or not enough heat.
Takes too long to dry.
Shuts off too soon.
Timer will not advance.
Will Not Start.
Noisy.
Will not shut off.

Lifetime Warranty – Click ‘Add to Cart’ now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein DR Quality Pares are registered and unregistered trademarks of DR Quality Products its affiliates and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of DR Quality Products or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this web site, except as provided herein, is strictly prohibited.”

This 010149 Zero Periscope is specifically designed for use in situations where the dryer Outlet overlaps or is very close to the wall Outlet. The 2 inch by 6 inch smooth aluminum construction telescopes to handle outlets up to 5 inches distance from center to center. The 4 inch diameter draw band collar synchs down over the clothes dryer vent i.e.. The 4 inch diameter crimped fitting slides into most wall ies. Once installed, it needs only 2.5 inches clearance behind the dryer. If your outlets are very close and you need to move the dryer closer to the wall, this vent maintains critical airflow and provides all metal performance. Clothes dryer manufacturers specify “only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent.” installation instructions are included inside each carton. The zero periscope is built in the USA by Builder’s Best, Inc.