894 reviews analysed
1. Frost King HC6A 6 Feet Automatic Electric Heat Cable Kits, Black
2. Easy Heat AHB-013 Cold Weather Valve and Pipe Heating Cable, 3-Feet
Feature
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing down to -40° F (-40° C)
- Prevents pipe freeze-ups
- Includes heating cable, grounded plug, built in thermostat and instructions
- Designed for rigid plastic and metal pipes up to 1.5” (38mm) in diameter
- Built-in thermostat saves energy by powering the cable only when needed
- Turns on below 38° F (3° C) and off above 45° F (7 ° C)
- Plug indicator light assures the system has power
- Plugs into a standard 120 VAC outlet
- Constructed of weather resistant PVC outer jacket, continuous ground braid and polyethylene inner insulation
- UL listed and CSA certified
Description
3′ automatic pipe heating cable, surface mounted snap action THERMOSTAT activates heat only when needed, heats to 7W per foot, TOTAL: 21W or 175a, for use with plastic or metal pipe, UL & CSA listed.
3. Thermwell Products HC18 Pipe Heat Cable 18 ft.
4. Easy Heat ADKS-1000 200-Foot Roof Snow De-Icing Kit
Feature
- Snow de-icing cable prevents winter damage to roof, gutters, and downspouts
- Provides uninterrupted path for melting water to flow off roof
- Suitable for most roof and gutter configurations
- available in several lengths
- Easy to install
- no maintenance required. Includes 6 packages of clips
- Fixed resistance, pre-terminated. For residential applications
Description
Product Description
Prevent winter damage to the roof, gutters, and downspouts with an Easy Heat ADKS Roof Snow De-Icing Kit. The simple yet effective design features a low-profile, black cable that snakes along outdoor surfaces and provides an uninterrupted path for melting water to flow without re-icing and forming dams. Suitable for almost any inclined roof and approved for both metal and plastic gutters, the cable is easy to install with the included clips and spacers and provides a handy service year in and year out with no maintenance required. It is also CSA Certified and UL Listed, provides 5 watts per foot and 120 VAC, and comes with a three-wire grounded plug and a 6-foot power cord. The cable is available in 30-, 60-, 80-, 100-, 120-, 160-, and 200-foot lengths to fit any sizing need; all mounting hardware is included.
From the Manufacturer
It’s not those big icicles that do the real damage, it’s the ice you don’t see that backs up in gutters and under shingles. When the ice melts it can really do a number on repair costs. Easy Heat ADKS roof de-icing cable prevents this water and ice damage by providing a clear path for melting water to flow off the roof. The versatile design adapts to most roof and gutter configurations. This product is intended for the sole use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and downspouts. This roof de-icing cable is not intended for use as a snow melting system to clear roof of ice and snow. This system can be installed with confidence that it will operate for years without requiring service. All components are made of the highest quality material and are tested during critical points in the manufacturing process.
5. HEATIT JHSF 6-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
Feature
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
6. Grip Clip Heat Tape Pro for Ice Dam Prevention Heavy Duty – Self-Regulating – Plug-in Ready Heat Cable – 120V, 6 watts/FT (50 Feet + 10 Feet Cold Lead)
Feature
- AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to about ice dam prevention. We are excited to help! Phone: 877-387-4218
- USES: For use on flat roofs, metal roofs, asphalt roofs, rubber roofs and more.
- HEAVY DUTY: Heat Tape Pro is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables such as EasyHeat and FrostKing.
- WARRANTY: Best-in-Industry 5 year warranty – ETL Listed – WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables.
- HEADS UP! Please don’t forget to order Radiant Solutions Company Roof Clips with this product – visit www.heattapecalculator.com for cable length and accessory recommendations.
7. Heat it HIRD 20 feet Roof Gutter De-Icing Cable
Feature
- Designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutter & downspouts. When properly installed and operated, this product creates a path for melted snow or ice (“melt water”) to drain from the roof to the ground.
- Used for Metal or plastic gutters/downspouts, Inclined roofs Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes. Different lengths are available
- Suitable for most roof and gutter configurations. HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
- Test the cable before installation. Uncoil the heat cable completely so it does not touch, cross over or overlap on itself. Do not plug in the cable until it has been completely uncoiled. Plug cable in, and in approximately few minutes, it should feel slightly warm to the touch. Then unplug the cable.
- Both CSA and ETL approved. 6 ft 18/3 cold lead with plug
- 5 watts/ft. Pre-assembled, ready to install, no maintenance required
- Easy instruction manual, clips and spacers are included.
- Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket. 100% screen rate with the Aluminum foil and tinned copper braid. More safe and more healthy. Three year limited warranty- If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact us in any time.
Description
What is the purpose of the heating cable?
The roof de-icing cable is designed to prevent ice buildup, known as ice dams, from forming on roofs and in gutters and downspouts. When properly installed and operated, this product creates a path for melted snow of ice (“melt water”) to drain from the roof to the ground.
Why you need to choose HIRD roof heating cable to protect your roof in the winter ?
HIRD roof heating cable was approved by both CSA and ETL. You can have more confidence on the product safety. Pre-assemble heating cable make installation easy for do-it-yourselfers with the included clips and spacers.
HIRD owned the aluminum foil and the tinned copper braid to make sure the 100% screen rate to make the product more healthy and more stable.
In the connection, HIRD take the industrial grade heat shrinkage tube technology to make the cable more durable.
How about the manufacturer?
The factory meet ISO9001 standard (audit by BV)in the production process and the company take a very strict requirement on the incoming material, production process control, finish good inspection etc. Advanced product structure engineering design, good raw material, strict production process, strict internal management plus many years maneuvering experience make HIRD more reliable.
This kit is only designed for use on:
Metal or plastic gutters/downspouts
Inclined roofs
Roofs with noncombustible shingles (Ex.: asphalt shingles) that meet national building codes
Do not use this kit on any other type of roof, gutter and downspout, including: Roofs with wooden shingles, Rubber or rubber membrane roofs, Composite (tar and gravel) roofs, Wooden gutters or downspouts, Flat roofs
HIRD cable cannot be used on slate, stone, metal and ceramic roofs.
These types of roofs require special installation or the use of a self-regulating cable.
8. GardenHOME Pipe and Valve Heating Cable (2X9Feet) Heat cables
Feature
- SECURED PROTECTION: From 9-11 feet (2.74-3.35 m) and up to 1-1 1/2 inches (25.4-38.1 mm) in diameter.
- EASY INSTALLATION: Just put our Icebreaker cable along the pipes to keep ice and coldness away (Recommended for use on water-filled metal and rigid plastic pipes).
- ENERGY SAVING THERMOSTAT CONTROLLED: The built-in thermostat can sense the temperature of the pipe. It turns the cable on at 38°F and turns it off automatically when the pipe has been heated to a temperature of approximately 45°F.
- ECONOMICAL: Reliable low wattage design saves up to 70% energy than other cables and protects your cable to -50°F.
- DURABLE: Weather resistant PVC outer jacket and inner insulation. It will operate for years without requiring maintenance.
Description
Say goodbye to frozen pipes in the winter with the GardenHOME Pipe Heating Cable – 9ft. with Thermostat, designed for preventing water pipes from freezing. This temperature-controlled cable runs along the pipes and valves, thawing frozen pipes. The build-in thermostat will sense the temperature of the pipe and turn the cable on and off, while only using five amps of electricity or less, to provide the most economical solution for frozen pipe disasters.
*Our Pipe Heating Cable & Ice Melting Cable prevents your pipes from major repair costs due to cold weather, snow or frozen water damage.
*This quick and easy ice-melting kit is ideal for indoor and outdoor use.
*It is winter and Subzero resistant, durable and long lasting due to its unique material composition. This Kit prevents congestions and ice backups.
*It is easy to install by using the included mounting hardware. It operates for years without requiring maintenance.
HOW IT WORKS
It is thermostat controlled. The built-in thermostat can sense the temperature of the pipe. It turns the cable on at 38°F and turns it off automatically when the pipe is heated to a temperature of approximately 45°F.
APPLICATION AREA
Used on pipes in House, Garage, Pipes, Garden, Patio and many more!
FEATURES
• Pre-assembled for easy installation
• Protects pipes from 9-11 feet and up to 1-1.5 inches in diameter
• Use on water-filled plastic and metal pipes only
• Economical solution to frozen pipe disasters
• Weather resistant PVC outer jacket and inner insulation
ABOUT US
GardenHOME stands for highest quality to the lowest price. We give 30-days MONEY BACK PROMISE! If you are not 100% satisfied!
9. HEATIT HISD 30-feet Pipe Heating Cable with Built-in Thermostat
Feature
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
10. WRAP-ON Pipe Heating Cable – 60-Feet, 120 Volt, Built-in Thermostat, Low Wattage – 31060
Feature
- BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately.
- PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation.
- ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
- USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes.
- MADE IN THE USA
Description
Product Description
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
From the Manufacturer
Pipe Heating Cable – 31060 60Ft. Ul Pipe Heat Cable
Conclusion
By our suggestions above, we hope that you can found Wraapon Pipe Heating Cable for you.Please don’t forget to share your experience by comment in this post. Thank you!