Finding your suitable readers for fpv receiver long range is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for fpv receiver long range including detail information and customer reviews. Let’s find out which is your favorite one.
947 reviews analysed
1. Radiolink AT9S Pro 10/12 Channels 2.4Ghz RC Radio Controller and Receiver R9DS Transmitter Long Range for FPV Racing Drone/Quad/Helicopter/Fixed Wing and More (Mode 2 Left Hand)
Feature
- 【Excellent Anti-interference】: DSSS&FHSS communication technology makes AT9S Pro radio with stable transmission signal, and the control range up to 2.1 miles(3.4km) in air.
- 【10/12 Channels】: All 10/12 channels can be customized to any switch and all channels’ fail-safe values can be set to any value as you need.
- 【Real-time Information】: When works with PRM-03 module and flight controller APM/Pixhawk/Mini PIX/Turbo Pix can give you real-time information on screen, like battery voltage, altitude, RSSI, flight mode, etc.
- 【Adapts to Most of Aircrafts】: Basic menu and advanced menu, simple language and logic to help you easily set up. Easy to bind to receiver R9DS/R12DSM/R12DSM/R6DS/R6DSM, suitable for helicoper, quadcopter, fixed wing, glider, cars, boat, etc.
- 【Safety Remind】: RSSI Alerts, low voltage alarm, failsafe protection. With DD sounds, vibratio and words alarming display on the LCD screen to remind when you are in noise environment.
2. Radiolink RC6GS V2 2.4G 6 Channels RC Transmitter and Receiver R7FG Gyro Volt Telemetry Long Range Radio Remote Controller for RC Car Boat Crawler Truck Drifting
Feature
- Two-way Communication: Real pseudo random algorithm FHSS communication technology makes RC6GS control distance up to 1900 feet (600meters), and over 40 units of RC6GS can work simultaneously at one place without any interference.
- Real-time Telemetry and Gyro Function : R7FG telemetry feature can give you real-time important information like vehicle’s battery voltage, RSSI signal and more. Built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
- 6 Channels: CH3-CH6 can be customized to VR, three-way switch and tact switch, the tact switch can be used for cruise control mode, a good idea for crawler, all channels’ fail-safe values can be set to any value as you need.
- Dual Programmable Mix Control: Mix control can be programmed with any two channels and each channel can be customized. That’s friendly for twin-engine vehicles, such as tanks, boats.
- Adapts to Most of Types Vehicles: with 10 models storage and each model can be set up and named separately. It is suitable for RC rock crawler, monster truck, Baja, off-road RC car, etc.
3. 2PCS Flysky FS-iA6B 2.4G 6 Channel Receiver – Miuezuth Long Range Dual-Pass PPM PWM Output ibus Remote Controller Transmitter Receiver – Compatible with FS-i4 FS-i6 FS-i10 FS-i6S FS-GT2E FS-GT2G
Feature
- Compatible with FS-i4 FS-i6 FS-i6S FS-i10 FS-GT2E FS-GT2G QX7 Turnigy Evolution. Offering superior protection against interference while maintaining lower power consumption and high reliable receiver senstivity.
- Input power: 4.0-6.5V DC. Easy to bind and very fast link-up. The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection.
- Long range 500 Meters and reliable, interference free 2.4GHz AFHDS2A signal operation. This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.
- Support PPM output, single wire connection flight control, with iBus interface, scalable channel. If you can’t bind it with your transmitter, please contact us feel free.
- Packing List: 2 X Flysky FS-iA6B Receiver, 2 X Bind plug. 3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth” to contact us.
Description
2PCS Flysky FS-iA6B Receiver, Long Range 2.4G 6CH Transmitter Receiver, Light Weight PPM Output with iBus Port, Compatible with FS-i4 FS-i6 FS-i10 FS-i6S FS-GT2E FS-GT2G RC Car Boat
Specifications:
Channels: 6 Channels
Model type: Airplane / Glider / Helicopter
Frequency range: 2.4–2.48GHZ
Band width number: 140
Transmitting power: not moer than 20dBm
RF receiver sensitivity: -105dbm
2.4G mode: the second generation of an enhanced version of the automatic FM digital system
Encoding: GFSK
Antenna length: 26mm * 2 (dual antenna)
Input power: 4.0-6.5V DC
Dimension: 47 * 26.2 * 15mm
Weight: 14.9g
Color: Black
i-Bus interface: Yes
Data acquisition interface: Yes
Package information:
Package size: 7 * 4 * 1.5cm / 2.8 * 1.6 * 0.6in
Package weight: 18g / 0.7oz
Packing List:
2 X Flysky FS-iA6B Receiver, 2 X Bind plug.
Customer Service
3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth” to contact us. Thank you.
4. AKK TS832+RC832 5.8G 2000M Range FPV Audio Video Transmitter and Receiver for FPV Drone
Feature
- Connector: VTX and receiver side RP-SMA jack, antenna RP-SMA plug
- Plug and play FPV transmitter and receiver set for Aerial Filming
- Easily Change frequency channels and bands by pressing button.
- It supports 5 bands and all frequencies compatible, Double-screen display for channels and bands
- It supports full range of 37 channels including raceband,designed for areas with too many frequencies in the air
Description
Features:
5.8 GHz 600mW AV wireless transmitter and receiver set
Designed for areas with too many frequencies in the air.
It supports 5 bands and all frequencies compatible.
Easily Change frequency channels and bands by pressing button.
Double-screen display for channels and bands.
It is a Plug and play FPV transmitter and receiver set for Aerial Filming.
Specification for TS832 Transmitter:
This 5.8GHz FPV transmitter has double push buttons for easy changing CH and FR.
40 channels: Cover A, b, E, F, r bands
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Transmitting distance: > 3000m (open area)
Antenna connector: RP-SMA connector
Operating Voltage:7-16V
Supply current: 220 mA
Operating Temperature: -10 +85 ℃
Video Band Width: 0-8.0 MHz
Audio carrier Frequency: 6.5 MHz
Video Input Level: 0.8,1.0,1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5 ,2.0 Vp-p
Audio Input Impedance: 10K Ohm
Specification for RC832 Receiver:
Power Supply: DC 12V
Antenna impedance: 50¦Ø
Video impedance: 75¦Ø
Working Frequency: 5.8GHz
Available Channel: 40CH
Consumption Current: 200mA, Max
Antenna Gain: 2dbi
Antenna Connector: RP-SMA
Audio Carrier: 6.5MHz
Video Format : NTSC/PAL
Dimension: 80x65x15mm
Weight: 85g
Package Included:
1 x RC832 FPV Receiver
1 x TS832 FPV Transmitter
2 x Antenna
2x Power cable
1 x AV cable
1 x User manual
Notice: Please correct connection and change the channel.
5. Radiolink R8F 8CH 2.4G RC Receiver SBUS/PWM/PPM Signal with Two Way Transmission FPV Car and Boat Long Range Control
Feature
- 8 Channels: support SBUS/PWM/PPM signal, with frequency hopping spread spectrum (FHSS) and 67-channel pseudo random to give a excellent anti-interference performance.
- Two-way Transmission Return: real-time vehicle battery voltage, signal tower information telemetry, avoiding the battery over-discharge.
- Long Range Control: dual antennas, stable remote control distance up to 1.2 mile in the air with T8S, good choice for FPV drone.
- Reverse Polarity Protection: even the polarities are mistakenly connected which not damaged. Support 4.8~10V high voltage servo.
- Easy to Bind: wireless bind to transimitter only 1 sencond. R8F works for T8S T8FB RC4GS RC6GS.
Description
Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Our products included: RC transmitter, flight controller, receiver, GPS, drone etc.
Note:
1. R8F rc receiver suitable for Radiolink’s transmitter RC4GS/RC6GS/T8FB/T8S.
2. R8F default is PWM signal output, red LED light on.
How to Match Code With Transmitter:
1. Put the transmitter and the receiver close to each other (but NO less than 50 centimeters) and power both on.
2. Switch on the transmitter. The LED on R8F will start flashing slowly and automatically bind to the closest transmitter.
3. There is a black binding button(ID SET) on the side of receiver. Press the button for more than 1 second and release, the LED will flash quickly, meaning binding process is ongoing.
4. When the LED stops flashing and is always on, binding is complete.
PWM and S-BUS&PPM working modes:
1.Quick press the ID SET switch twice within 1 second, the signal is changed from PWM to S-BUS&PPM.
2.Red LED indicates PWM signal output with 8 channels totally work, blue/purple LED indicates SBUS&PPM signal output, 8 channels totally work.
3.Blue LED indicates SBUS&PWM signal output.
R8F Receiver Specifications:
Channel: 8CH
Model: Cars/boats/fixed wing/quadcopter
Control Distance: more than 1.2 mile
Spread Spectrum: FHSS
Antenna Length: 200mm
Work Current: 30mA
Power Supply: 4.8~10.0V DC
RF Power: <10dbm
Channel Resolution: 4096
Size: 1.34*0.83*0.45 inch
Weight: 0.23oz
Package Included:
R8F Receiver x 1
6. 2PCS Flysky Long Range FS-GR3E Receiver, Miuezuth 3CH 2.4Ghz Receiver Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-GT3X FS-IT4S Transmitter RC Car Boat Truck
Feature
- Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-IT4S FS-GT3X.
- Long range over 1000 yard. Reliable, interference free 2.4GHz AFHDS signal operation.
- Light weight about 6.5g. Very easy to bind, fast link-up, strong signal distance.
- If you need the FS-GR3E Receiver with waterproof function, please check the link: https://www.amazon.com/dp/ B07PHFC5J2
- Package List: 2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug. 3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth” to contact us. Thank you.
Description
2PCS Flysky Long Range FS-GR3E Receiver, Dreamfire 3CH 2.4Ghz Receiver Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FS-GT3X FS-IT4S Transmitter RC Car Boat Truck
Specifications:
Channels: 3 Channels;
Model type: car/boat;
RF receiver sensitivity: -105dbm;
Modulation: GFSK;
System type: AFHDS;
Sensitivity: 1024;
Failsafe: yes (channel 2);
Bind port: yes (channel 3);
Power port: yes (VCC)
Power: 4-6V DC;
Weight: 6.5g;
ANT length: 26mm;
Size: 37.6*22.3*13mm ;
Package List:
2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug.
Customer Service
3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth” to contact us. Thank you.
Matching(Code)
A. Install the battery to 2.4G transmitter and shut it down.
B. Insert the matching lines to the channel BIND/CH3 port of the receiver.
C. Connect the receiver battery to VCC port of the receiver, on the same time the two LED are flashing and this means the receiver are going to the matching status.
D. Press and hold the button on the transmitter, and then switch on the power supply.
E. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful Matched. (This process about 5s)
F. Release the match button on the transmitter, take out the match line.
G. Install the server and then test.
H. If the tests fail, please repeat the action above.
I. If the tests success, then insert the power supply port into VCC, match complete.
More options for you:
fs-ia6b: B07PHC79F8
fs-r6b: B07PLHCQ4C
waterproof fs-gr3e: B07PHFC5J2
fs-bs6: B07PJJYQW6
fs-gr3f: B07PLJ9ZY1
fs-i6: B07QG575R5
fs usb cable: B07QG575R5
7. 2Pcs Flysky FS-GR3E Receiver, Long Range 2.4G 3CH Receiver for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S RC Car Boat Transmitter
Feature
- Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S.
- This 3CH receiver is very easy to bind very fast link-up, strong signal distance.
- Reliable, interference free 2.4GHz AFHDS signal operation. Long range over 1000 yard.
- If you need the FS-GR3E Receiver with waterproof function, please check the link: https://www.amazon.com/dp/B077N5TQTB
- Package included: 2 X Flysky FS-GR3E, 2 X Antenna tube, 2 X Bind plug. Any question please contact us feel free. Thanks.
Description
Features:
The Standard 2.4Ghz 3-Channel Receiver for RC car and boat
Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind
Channels: 3 channels
Model type: RC Car/boat
Modulation: GFSK
Code type: PPM
Frequency:2.4G
Certificate: CE FCC
Power:5V DC(1.5AAA x 4)（not included)
System type: AFHDS
Sensitivity: 1024
Failsafe: yes (channel 2)
Bind port: yes (channel 3)
Power port: yes (VCC)
Specifications:
Original box: NO
Size:35.5 x 22 x 13mm
Ant lenght :180mm
Color : Black
Net Weight:2g
Package weight:8g
Matching(Code)
A. Install the battery to 2.4G transmitter and shut it down.
B. Insert the matching lines to the channel BIND/CH3 port of the receiver.
C. Connect the receiver battery to VCC port of the receiver, on the same time the two LED
are flashing and this means the receiver are going to the matching status.
D. Press and hold the button on the transmitter, and then switch on the power supply.
E. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful Matched. (This process about 5s)
F. Release the match button on the transmitter, take out the match line.
G. Install the server and then test.
H. If the tests fail, please repeat the action above.
G. If the tests success, then insert the power supply port into VCC, match complete.
(The above ways of match is only suitable for FLYSKY 2.4G products)
8. Radiolink R8SM 2.4G 8 Channels Mini Receiver SBUS/PPM Long Control Range for FPV Micro Drone
Feature
- Strong Anti-interference: with frequency hopping spread spectrum (FHSS) pseudo random algorithm to give R8SM with excellent anti-interference ability.
- 8 Channels: support universal SBUS/PPM standard signal for FPV racing drone.
- Super Mini Size: light weight and tiny size for mini drone, such as 130 120 110 drone.
- Long Range Control: stable remote control range up to 1.1 mile in the air with T8S/T8FB.
- Easy to Bind: only 1 second bind to T8S/T8FB transmitter.
Description
Radiolink is a high technology manufacturing company dedicated to researching, manufacturing and marketing of RC model radio transmitters. Our products included: RC transmitter, flight controller, receiver, GPS, drone etc.
Note:
1. R8SM rc receiver suitable for Radiolink’s 8 channles transmitter T8FB/T8S/RC4GS/RC6GS.
2. R8SM default is PPM signal output, red LED light on.
How to Match Code With Transmitter:
1. Put the transmitter and the receiver close to each other (about of 50 centimeters) and power both on.
2. Switch on the transmitter. The LED on R8SM will start flashing slowly and automatically bind to the closest transmitter.
3. There is a black binding button(ID SET) on the side of receiver. Press the button for more than 1 second and release, the LED will flash quickly, meaning binding process is ongoing.
4. When the LED stops flashing and is always on, binding is complete.
PPM and SBUS working modes:
1.Quick press the ID SET switch 2 times within 1 second, the signal is changed from PPM to SBUS.
2.Red LED indicates PPM signal output with 8 channels totally work, blue/purple LED indicates SBUSsignal output, 8 channels totally work.
R8SM Receiver Specifications:
Channel: 8CH
Signal: PPM/SBUS
Model: cars/boats/quadcopter
Control Distance: 1.2 mile in the air
Spread Spectrum: FHSS
Antenna Length: 200mm
Work Current: 30mA
Power Supply: 4.8~6V DC
RF Power: <10dbm
Channel Resolution: 4096
Size: 0.70″*0.51″ inch
Weight: 2g
Package Included:
R8SM Receiver x 1
Connect Cable x 1
9. AKK Diversity RX 5.8G 48CH FPV Receiver Module Built-in Low Power Buzzer SMA Female Diversity Receiver with Two RX Modules Compatible with FatShark Goggles
Description
Specifications:
Frequency: 5.8GHz
Number of CH: 48 Channels
Antenna connector: SMA Female
Input voltage: 5V
Compatible with FatShark goggles
Built-in Low Power Buzzer
Note:
AKK Diversity RX doesn’t come with cover to fit with your goggles
Conclusion
By our suggestions above, we hope that you can found Fpv Receiver Long Range for you.Please don’t forget to share your experience by comment in this post. Thank you!